1983 - Mercedes-benz 500-series on 2040-cars

Auto blog

Recharge Wrap-up: liquid-cooled Tesla Supercharger, Acenta+ Leaf

A new video offers a close look at Tesla's updated Supercharger. Recently, Elon Musk spoke about the new charging station with a thinner, suppler liquid-cooled cable that is not only easier to manage, but has the potential to handle larger loads and offer quicker recharging. The first examples have been installed in Mountain View, CA, which we can see in this video. Besides the new cable, the new Supercharger also features a solid "button" on the charging handle as well as vents around the bottom of the unit. The video even shows thermal imaging of the new Supercharger, which shows the cable to be cooler than the cameraman usually records. See for yourself in the video above, and read more at Treehugger. Nissan has added a new trim level to the Leaf in the UK. The Acenta+ slots above the Acenta and just below the range-topping Tekna. It comes standard with the 6.6-kW onboard charger and Mode-3 32-amp (EVSE) cable. Using a fast charger, the Acenta+ Leaf can charge to 100 percent in just four hours. "We're delighted to add a new member to the Leaf family in the UK," says Nissan Motor GB Managing Director James Wright. "More than 9,500 Leafs have already been sold here and Nissan is the undisputed leader in the EV market. This new model delivers exceptional value and showcases the Leaf's incredible technology and engineering." Read more at Next Green Car. Mercedes-Benz Malaysia says its vehicles are compatible with B10 biodiesel blend. Malaysia recently announced a mandate for diesel to be sold blended with 10 percent palm-oil based biodiesel, after which, carmakers like BMW and Mercedes-Benz came forward with concerns over compatibility with their vehicles. "We have evaluated carefully the influence of B10 Biodiesel blends on our current diesel vehicles for the Malaysian market and we are now able to confirm its compatibility," says Mercedes-Benz Malaysia President and CEO Roland Folger. "We have service intervals of 12,000 km to ensure that our customers are not affected by the diesel quality. Our diesel-powered vehicles currently sold in Malaysia were seen to have run both smoothly and safely with the use of the B10 biodiesel blend." Read more from Paul Tan's Automotive News. Renault has honored its leading electric vehicle dealers with the 2015 Renault EV Awards.

Our love of SUVs is killing people in the streets

Americans are fond of supersized fast-food meals and colossal convenience-store fountain drinks, even though they're clearly bad for our health and U.S. adults keep getting fatter. We also like large vehicles, and our love affair with SUVs is killing people in the streets. According to a recent investigation by the Detroit Free Press/USA Today, the increase in SUV sales over the past several years coincides with a sharp rise in pedestrian deaths in the U.S. — up 46 percent since 2009, with nearly 6,000 people killed in 2016 alone. With SUV sales surpassing sedans in 2014 and pickups and SUVs currently accounting for 60 percent of new vehicle sales, it's no wonder Ford announced in April plans to cease U.S. sales of almost all passenger cars. And this followed Fiat Chrysler's move to virtually an all-truck, -SUV and -crossover lineup. While the Freep/USA Today investigation found that the simultaneous surge in SUV sales and pedestrian deaths comes down to vehicle size, it also points to a lack of action on the part of the National Highway Traffic Safety Administration (NHTSA), even though it knew of the dangers SUVs pose to pedestrians. Also blamed are automakers dragging their feet on implementing active safety features. Using federal accident data, the Insurance Institute for Highway Safety (IIHS) determined that there was an 81 percent increase in single-vehicle pedestrian fatalities involving SUVs between 2009 and 2016. Freep/USA Today's analysis of the same data by counting vehicles that struck and killed pedestrians instead of the number of people killed showed a 69 percent increase in SUV involvement. As far back as 2001, researchers at Rowan University forecasted a rise in pedestrian deaths as Americans began switching to SUVs. "In the United States, passenger vehicles are shifting from a fleet populated primarily by cars to a fleet dominated by light trucks and vans," the researchers wrote, with light trucks comprising SUVs.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...