Rx7 Ls1 Drift Race Car on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

MotorWeek proves '90s were awesome with Supra, Stealth, RX-7, Corvette, 968, 300ZX comparo

Oh, the heady days of 1993, back when the Clinton Presidency was just getting underway, and it seemed like every hot new rock band was coming out of Seattle. Sports cars in the US had finally shaken off the shackles that slowed them during the '70s and '80s, and you could buy any number of legitimately quick vehicles again. MotorWeek recently went digging into its archives to find this six-model test from 1993 showing off some of the best semi-affordable performance coupes that money could buy at the time, and it's priceless.
Featuring the 1994 model year Toyota Supra in twin-turbo guise and MY 1993 versions of the Porsche 968, Nissan 300ZX TT, Mazda RX-7, Dodge Stealth R/T Turbo and Chevrolet Corvette LT-1, MotorWeek definitely covered all of the bases. One thing that might surprise younger readers is these cars' performance. The video only provides 0-60 acceleration times, but several of these vehicles would still be considered pretty potent today - over 20 years since going on sale. The Supra is especially impressive, hitting 60 miles per hour in just 5 seconds. Even today, that's nothing to sneeze at.
Given their performance potential and still-attractive looks, it's amazing that some of these coupes are old enough to drink now. The progress of interior design and safety equipment in the intervening years is pretty shocking, though. In most of these models, having two airbags is touted as a big deal. Scroll down to watch a Throwback Thursday blast from the past about some of the '90s best sports cars.

2016 Mazda MX-5 Miata shows off perfect 50/50 weight balance

When I attended the first drive event for the Japanese-spec 2016 Mazda MX-5 Miata in Spain earlier this year, I was blown away – and not just by the car. I was blown away by the charts and graphs Mazda's engineers brought along, showing how every little facet of the ND Miata was finely tuned for pure driving perfection. It's like rocket science. Only cooler. One of the most important parts of the Miata package is its weight distribution. The 2,332-pound roadster must achieve a perfect 50/50 balance, with a driver inside. That's not easy. But it has to be done. Only the best for the Miata. In this video, Mazda shows off the Miata's balance by putting it on an aluminum balance beam, to see if the car stays perfectly centered. You can probably guess the outcome, but watching it all take place is super cool, especially with commentary by Mazda engineer Dave Coleman and MX-5 program manager Rod McLaughlin. How does the 50/50 balance help the Miata's handling out on the road? You'll have to wait until the embargo on driving impressions for the US-spec car lifts. We'll have the full scoop at 3:01 AM Eastern on Monday, June 1. In the meantime, get a sneak preview of the new Miata in the video below. Autoblog readers got a closer look at the 2016 MX-5 at our Cars & Coneys meet-up, and as you can see, the excitement for this car is definitely real.