2003 Mazda Protege 5 2.0l Great Gas Mileage Hatchback 5 Speed on 2040-cars

Auto blog

Mazda recalling 190,000 CX-7s due to rusty ball joints

UPDATE: This post has been updated with additional information from Mazda. The Basics: Mazda is recalling 190,102 Mazda CX-7 crossovers built between February 14, 2006, to May 9, 2012 – model years 2007 through 2012. The Problem: Water can sneak in between the suspension ball joint fittings. If snow and road salt are common in your neck of the woods, the joints can corrode and separate from the lower control arms. That's bad if you enjoy steering your CX-7. According to Mazda, owners of affected models may notice a rattle from the front suspension due to the loose ball joint in the lower control arm fitting. Mazda describes separation of the ball joint and control arm as a "worst case" scenario "after extended operation in such condition." Injuries/Deaths: It's unknown if the rusting issue has led to any crashes, injuries, or deaths. Autoblog has a call into Mazda for additional details and will update this post with any new information. There have been no reports of accidents, injuries, or fatalities related to this recall. The Fix: Owners should report to their local Mazda service center, where techs will replace the both front lower control arms. Any work done is free of charge. If you own one: Mazda will perform some automotive triage with this recall, focusing on CX-7s that have had the longest exposure to salt and are most likely to suffer control arm separation first. Owners of 2007s and 2008s come first, followed by 2009 through 2011 models. Mazda will also focus on vehicles registered in states where snow and road salt are most common – Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, D.C. If you live in a more temperate region or own a 2012 CX-7, Mazda will perform recall work as "parts are available." Owners can contact Mazda customer service at 1-800-222-5500 for additional info. Recall notices should hit the mail around October 10th. Related Video: Featured Gallery 2011 Mazda CX-7: Review View 21 Photos News Source: NHTSAImage Credit: Copyright 2016 AOL Recalls Mazda Crossover mazda cx-7

Mazda 767B crashes during Goodwood, suffers heavy damage [UPDATE]

Update: Autoblog has learned that the Mazda 767B wrecked at Goodwood was being driven by Seniji Hoshino. He was not seriously harmed and was able to walk away from the crash. Hoshino's car was chassis 001 and scored a win in the GTP class of the 1989 24 Hours of Le Mans. A Mazda 767B Group C racer suffered a crash the Goodwood Festival of Speed that tore off the rear wing and did some fairly serious looking front end damage. According to Jalopnik, the racer was taking a timed run during the event's famous hillclimb when it went into the hay bales. The driver is reportedly okay, though. We've reached out to Mazda and Goodwood sources to identify the pilot in question, with no luck so far. Look for an updated post later in the day if we get any answers on that front. Images of the sad wreck seem to be populating on Twitter feeds as we write this. The racing Mazda clearly suffered a big hit today; painful to look at even after the fact. But we're not sure if the damage is beyond the abilities of skilled factory workmen to fix. Our collective fingers are crossed. Mazda has a major presence at Goodwood this year, including the event's art installation. Among all of its vehicles, there are two privately owned 767Bs. These racers have a four-rotor engine, said to be good for more than 600 horsepower in racing trim, and are predecessors to the famous 787B that scored an overall win in the 1991 24 Hours of Le Mans. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Flyin' Miata's 525-hp V8-powered ND finally hits the streets

Flyin' Miata, in its valiant quest to turn Mazda's roadsters into small, Japanese Corvettes, has finally finished its first V8-powered ND Miata. The company has been slowly teasing us with images and videos for months, but it wasn't until this week that the car finally made it to the streets. As soon as the current ND generation Miata was released, Flyin' Miata started the work to shoehorn a GM LS3 under the hood. The company has a history of building brutish, V8-powered Miatas. It sells everything from minor parts to full V8 conversion kits. For those with the cash that prefer to avoid the hassle, Flyin' Miata will sell you a complete, turn-key car. The price hasn't been finalized, but customers should expect to pay about $50,000 plus the cost of the MX-5. The new car has a worked-over LS3 that sends 525 horsepower to the rear wheels through a Tremec T56 transmission. Flyin' Miata says the rear differential comes from a V8 Camaro. Other new bits include exhaust, suspension, brakes, and a roll cage. Flyin' Miata tells us that the V8-swapped ND will weigh 2,592 lbs, a little more than 200 lbs more than the porkiest stock Miata. Despite twice as many cylinders and more than three times the displacement of the stock four banger, the LS3 V8 is a relatively small and lightweight engine. The finished car has a 53:47 front to rear weight distribution. Final touches are being finished, but cars and kits should be available soon. This article has been updated with some info straight from Flyin' Miata. Thanks, Keith! Related Video: News Source: Road & Track, Flyin' Miata Mazda Convertible Performance flyin miata