2011 Mazda Touring on 2040-cars

Auto blog

Mazda2 with extended-range hybrid rotary tech shown

Every story dealing with a new rotary engine from Mazda lands in a different place on the matrix of possibilities between "Coming soon!" and "Never gonna happen!" In 2011 it was speculated that the rotary engineering program would be shut down with the demise of the RX-8, in 2012 the program was still alive and taking lessons from the SkyActiv engines, in August 2013 a Mazda insider said a rotary engine called 16X would be here in two years, in November the CEO said the only way we'd ever get a new rotary is if Mazda could sell 100,000 of them per year. Meaning that, for the moment, you can forget about it.
And yet, last month Mazda was putting journalists in a Mazda2 RE Range Extender, an electric car using a 0.33-liter rotary to power its lithium-ion batteries when the charge runs down. With a 75-kilowatt, 100-horsepower electric motor turning the front wheels, the Wankel generator and its 2.6-gallon gas tank living under the trunk double the range of the electric-only Mazda2 to 250 miles.
There's been talk of using a rotary to assist an alt-fuel vehicle for at least seven years, with Mazda pairing an electric motor with a rotary that ran on gas and hydrogen in a Mazda5 in 2007. Since then, almost all of those stories debating its return or demise also spoke of the oddball motor's advantages, such as compact size and ability to run on various fuels, as an aid in an unconventional powertrain.

Massive Airbag Recall Affects Seven Automakers

The recall of faulty airbag inflators supplied by Takata has exploded today to grow to seven automakers. In most cases, only models in certain high-humidity regions were affected because the National Highway Traffic Safety Administration found in its investigation that moisture played a role in determining whether there would be a problem. However, some companies opted for national campaigns. The exact number of affected models for these campaigns isn't yet known at this time. BMW is recalling an undisclosed number of 325i, 325Xi, 330i and 330Xi models from the 2001 through 2005 model years and the 2001-2006 model year versions of the 325Ci and 330Ci for the driver side and passenger side inflators. Only vehicles currently registered in Florida, Puerto Rico, Hawaii and the US Virgin Islands are covered under this recall. Neither Chrysler's filing with NHTSA nor its press release list the specific models affected, but a company spokesperson told Autoblog that at this time it only covers the driver and passenger side inflators for the 2006 Dodge Charger in Florida, Puerto Rico, Hawaii and the US Virgin Islands In most cases, only models in certain high-humidity regions were affected because the NHTSA found that moisture played a roll in determining if there would be a problem. Ford is recalling an estimated 58,669 cars that include the 2005-2006 model years of the Ford GT for the driver and passenger inflators, the 2007-2007 model years of the Mustang for the driver side and 2004 Ranger for the passenger side. It covers vehicles originally sold or currently registered in, wait for it... Florida, Puerto Rico, Hawaii and the US Virgin Islands. Honda is issuing three separate recalls regarding the problem. First, the company is recalling the 2002-2003 model years Civic, CR-V and Odyssey and the 2003 model year of the Accord, Element, Pilot and Acura MDX to replace the passenger's side inflator. This covers all models nationwide. Second, Honda is repairing the passenger's side airbag inflator in the 2003-2005 Accord, Civic, CR-V, Element, Pilot, the 2003-2004 model year versions of the Odyssey, the 2003-2005 model year Acura MDX and 2005 Acura RL. However, only for vehicles located in Alabama, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico and the US Virgin Islands. Owners will be notified in July. Finally, Honda is separately replacing some models' driver's side inflators.

So, just how different are the Fiat 124 Spider and Mazda MX-5 Miata?

"We leveraged a great platform." That's how Bob Broderdorf, Jr., Fiat's North American director, summarizes the creation of the 124 Spider. We all know Fiat's new roadster shares its underpinnings with the fourth-generation Mazda MX-5 Miata, but there are a lot of key differences to keep them separate in the eyes of consumers. Mazda may have engineered the platform, but Fiat added many of its own touches. Here, we'll take a closer look at the spec sheets of the two cars, and summarize the major differences between the Japanese and Italian roadsters. If you need a refresher, read our full First Drive of the 2016 MX-5 Miata, and glance at all the Fiat 124 Spider details in this post. Design Fiat Chrysler design lead Ralph Gilles is super excited about this car. "I think it's going to change lives," he told the assembled media at an event in Auburn Hills, MI, earlier this month. Yes, it's definitely exciting to add a small roadster to any lineup, especially one that uses such a proven platform. But we're not sure people are going to get all that jazzed about it from a design standpoint. You'll either love it or hate it, and we're kind of leaning toward the latter. Every single body panel is new, and the design is "100 percent Italian." There are a number of creases and angles throughout the exterior, with a squared-off rear end and rectangular taillamps. Fiat trusts you'll be able to spot the similarities between the new 124 Spider and the original, but we're not so sure. We can see a bit of the old car's grille on the new car's face, and the dual hood blisters are a nice throwback touch, but that's about it. Trust us when we say that this car looks way better in photos. In person, it really didn't wow us. Of course, beauty is in the eye of the beholder. One colleague told us his wife, a long-time Miata owner, hates the look of the new one but will absolutely adore the Fiat. Good for her, and good for Fiat. But based on design alone, we'll take the Mazda every single time. What about you? Dimensions When Broderdorf said Fiat leveraged the Miata's platform, that means the Italians took it as-is. The two cars ride on an identical, 90.9-inch wheelbase. The front and rear tracks lengths are the same, at 58.9 and 59.1 inches, respectively. But that's where the similarities end.