2010 Mazda Mx-5 Miata Grand Touring Convertible 2-door 2.0l on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Mazda engineer wants new rotary to be turbocharged

Hope springs eternal for Mazda to revive the high-revving Wankel engine for a new sports car, and the company keeps feeding that thirst with hints that it could happen. To make the possibility even more tantalizing, Mazda drivetrain and powertrain assistant manager Tetsushi Marutani tells Motoring that he wants the updated mill to pack a turbocharger. "Personally, I think that a rotary with some turbo or compressor would be good," Marutani said to Motoring. "Because a rotary, in my opinion, they require more [torque at] low speed, low down torque. So if we have some small compressor or turbo it would help." Mazda hasn't sold a rotary-powered model since the RX-8 and hasn't had a turbocharged one since the third-generation RX-7. However, the recent RX-Vision concept (above) at least hinted at a possible Wankel revival, and Mazda officials confirmed that its engineers continued to develop the engine since the RX-8's demise. The RX-Vision used a next-gen rotary called the Skyactiv-R, but Mazda didn't officially confirm any details about it. Rumors suggested the engine had a two-rotor layout with a total displacement of 1.6 liters. A two-stage electric turbo and hybrid powertrain would allegedly boost the total output of around 450 horsepower. The electric assistance could also counter the Wankel's lack of torque at low revs and poor fuel economy. Those rumored specs sound fantastic, but we still take the rotary's return with a grain of salt. Mazda CEO Masamichi Kogai is adamant that it's not worth the company's limited resources to develop a niche sports coupe instead of better selling vehicles. Related Video:

Mazda previews 2016 Miata Global MX-5 Cup racer

At this point, we all know that the Mazda MX-5 Miata is a highly capable racing platform. Mazda even claims that the car is the most road-raced model in the world. Fittingly, then, the Japanese brand is making a huge announcement about the future of motorsport for its next-generation convertible. The MX-5 Cup is going worldwide in 2016 as the MX-5 Global Cup, and all of the racers are getting behind the wheel of the upcoming fourth-gen Miata, similar to the gorgeous redhead pictured above.
"It has long been our goal to see Mazda fans around the world competing in identical MX-5s, and the launch of the 2016 MX-5 Miata is the perfect time to make this goal a reality," said Masahiro Moro, Managing Executive Officer in charge of Global Sales, Marketing and Customer Service for Mazda in the company's announcement.
The racing version makes its grand debut at this year's SEMA show, although at the moment it's really more of a concept. Mazda confirms that the racer uses the 2.0-liter SkyActiv four-cylinder, but the other important parts like tires, suspension and safety equipment are not yet determined. The cars "will be sold ready to race from a single supplier," according to automaker's announcement for the series.