1999 Mazda Mx-5 Miata on 2040-cars

Auto blog

Full 2016 Mazda MX-5 Miata pricing released

Take heart, roadster fans. The first 2016 Mazda MX-5 Miatas due for the US are now in production. To go along with that milestone, the Japanese automaker has finally released full pricing for the fourth-generation Miata. As previously revealed, the 2016 Miata in the base Sport trim starts at $24,915 (plus $820 destination), and for that outlay buyers get a 2.0-liter four-cylinder making 155 horsepower and 148 pound-feet of torque that's matched to a six-speed manual. The convertible comes standard with features like LED lighting and a Bluetooth-equipped audio system. For $1,075 more on all models, customers can spec a six-speed automatic gearbox, and keyless entry is another $130 but standard with the auto 'box. One rung up is the Club trim for $28,600, and it improves things with 17-inch wheels, a more aggressive body kit and a seven-inch touchscreen infotainment system. Order the manual trans, and the roadster gets a limited-slip differential, Bilstein dampers and a shock-tower brace. There's also a $3,400 package to make this version of the convertible even sportier with 17-inch BBS wheels, Brembo front brakes, side sill extensions and a rear bumper skirt. Among the regular trims, the top rung is the Grand Touring for $30,065 that adds luxuries like heated, leather seats, automatic climate control, rain-sensing wipers, and adaptive headlights. Mazda's i-Activesense is also standard and includes blind spot monitoring, rear cross-traffic alert and lane-departure warning. Finally, there's the Launch Edition, which is limited to 1,000 units, and it sells for $30,495 (or $31,570 for an automatic). All of them come in an exclusive combo of Soul Red with Sport Tan leather, and buyers get all of the Grand Touring's kit, plus standard keyless entry. The order site for these special roadsters opens on May 5, but hopefuls can pre-register now for a reminder. The first 2016 Miatas should hit dealers in late summer. That should provide some time for top down driving fun before it gets too cold. Related Video: U.S.-Bound 2016 Mazda MX-5 Miata Production Kicks Off Today - Mazda Also Announces U.S. Pricing for Entire MX-5 Lineup - IRVINE, Calif. (April 20, 2015) – The wait is almost over, as North America-bound 2016 Mazda MX-5 Miata production began today, signaling the imminent arrival of the next generation of the world's most popular two-seat roadster at U.S. dealers.

2016 Mazda MX-5 Miata won't get power folding hardtop

Following the reveal of the 2016 Mazda MX-5 Miata, more and more details (and rumors - oh, the rumors) are coming out regarding exactly what's in store when the car finally goes on sale. Our own Chris Paukert had plenty to say about the exterior and interior, and we've now seen the first photo of the engine. But a new report from Automobile sheds even more light on the 2016 Miata - specifically, that the power folding hardtop model won't be available, at least initially.
Automobile reports that the 2016 MX-5 will only be offered with a cloth top, and an insider confirmed that the mechanism is light and accessible enough that it can be raised and lowered with one hand from inside the car. Mazda officials would not comment on the availability of a hardtop in the coming years.
That said, a hardtop Miata isn't out of the question. There will likely be some sort of fixed roof available - even as a one-piece, lift-off accessory - if only for club racing. Also, remember that the current NC Miata's hardtop is the only one on the market that doesn't take up any additional trunk space, so it's an attractive proposition for buyers. Currently, the power hardtop is only offered on the Club and Grand Touring MX-5 Miata trims.

2017 Mazda CX-9 Prototype First Drive

If you read our coverage from last week's Los Angeles Auto Show, you'll note that we were extremely fond of the new Mazda CX-9. We like the look of the thing, inside and out, and it promises to be the best-driving entry in the three-row crossover class. We agree wholeheartedly with that claim. You see, we already drove it. Full disclosure: Our test of the camouflaged CX-9 prototype you see here was short, and while we were able to get a good handle on the CX-9's basic driving dynamics, it'll take more than a 30-mile session around the outskirts of LA to uncover the finer details. What's more, these vehicles are not production ready. In fact, according to our handlers at Mazda, the CUV we tested was actually at the stage before pre-production – so basically, a pre-pre-production car. That said, all the details about the engine, transmission, suspension, and steering are "largely final." As you can see in the gallery, the cars we tested were heavily camouflaged both inside and out. As for styling, we love it – see the undisguised pictures from the LA show for more views. And as for inside, we can say leather seats of our Grand Touring model were comfortable and supportive, and the smallish steering wheel felt natural in the hand. Even in pre-pre-production state, the CX-9 was impressively quiet. An extra 53 pounds of under-floor sound deadening, thicker windows, and active noise cancellation all contribute to what Mazda claims will be "among the quietest vehicles in its class." It's worth noting that the good sounds, like the throaty, whooshy noises of the turbocharged engine, found their way into the cabin just fine. The 2.5-liter, turbocharged four-cylinder engine – Mazda's first force-induced Skyactiv engine – is an excellent piece. The 2.5-liter, turbocharged four-cylinder engine – Mazda's first force-induced Skyactiv engine – is an excellent piece. It uses a variable geometry turbocharger, which the company calls a Dynamic Pressure Turbo. Here's how Mazda explains it: Imagine a normal garden hose. Put your thumb over the nozzle, and the force of the water increases dramatically. That's the DPT at low rpms. It features three small exhaust ports to direct exhaust gases into the turbo, making for 17.4 quick-spooling PSI at low rpms. As the revs climb, a flow control valve opens up, redirecting the gases to a trio of larger ports – removing your thumb from the hose, if you will – and keeping the boost up.