Mazda Mazda6 I Touring New 4 Dr Sedan Gasoline 2.5l 4 Cyl Engine Meteor Gry Mica on 2040-cars

Auto blog

100k Mazda6 sedans recalled over tire-monitoring systems

A tire pressure monitoring system (TPMS) is, as you might have guessed, designed to monitor the air pressure in the tires, and alert the driver if pressure drops. But a problem found in the Mazda6 could keep the system from doing its job. According to the recall notice issued by the National Highway Traffic Safety Administration, the TPMS in the Mazda6 might not recognize a loss in tire pressure if all the tires slowly deflate at the same time. Under-inflated tires, it goes without saying, could increase the risk of a crash. As a result, Mazda is recalling 99,711 examples of the 2014-2015 Mazda6 to have the system's software updated. RECALL Subject : Tire Pressure Monitoring System/FMVSS 138 Report Receipt Date: OCT 27, 2014 NHTSA Campaign Number: 14V675000 Component(s): TIRES Potential Number of Units Affected: 99,711 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2014-2015 Mazda6 vehicles manufactured October 25, 2012, to October 10, 2014. If the pressures of four of the tires on an affected vehicle gradually drop at the same time, the tire pressure monitoring system (TPMS) may not warn the driver of the drop in pressure. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) No. 138, "Tire Pressure Monitoring System." CONSEQUENCE: A vehicle that is driven with under inflated tires may experience a sudden tire failure, increasing the risk of a crash. REMEDY: Mazda will notify owners, and dealers will update the TPMS software, free of charge. The recall is expected to begin on December 10, 2014. Owners may contact Mazda customer service at 1-800-222-5500. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Automakers want to stop the EPA's fuel economy rules change, and why that's a shortsighted move

With a Trump Administration looming, the EPA moved quickly after the election to propose finalizing future fuel economy rules last week. The auto industry doesn't like that (surprise), and has started making moves to stop the EPA. Ford CEO Mark Fields said he wanted to lobby Trump to lower the standards, and now the Auto Alliance, a manufacturer group, is saying it will join the fight against cleaner cars. The Alliance represents 12 automakers: BMW, Fiat Chrysler, Ford, GM, Jaguar Land Rover, Mazda, Mercedes-Benz, Mitsubishi, Porsche, Toyota, VW, and Volvo. Gloria Bergquist, a spokesperson for the Alliance, told Automotive News that the "EPA's sudden and controversial move to propose auto regulations eight months early - even after Congress warned agencies about taking such steps while political appointees were packing their bags - calls out for congressional action to pause this rulemaking until a thoughtful policy review can occur." The EPA was going to consider public comments through April 2017, but then said it would move the deadline to the end of December. That means that it can finalize the rules before President Obama leaves office. The director of public affairs for the Consumer Federation of America, Jack Gillis, said on a conference call with reporters last week when the EPA originally announced its decision that it is unlikely that President Trump will be able to roll back these changes. Gillis also said on the same call that any attempt by the automakers to prevent these changes would be history repeating itself. "These are the same companies that fought airbags, and now promoting the fact that every car has multiple airbags," he said. "These are the same companies that fought the crash-test program, and now are promoting the crash-test ratings published by the government. So, it's clear that they're misperceiving the needs of the American consumer." There are more reasons the Allliance's pushback is flawed. Carol Lee Rawn, the transportation program director for Ceres, said on that call that the automotive industry is a global one, and many automakers are moving to global platforms to help them meet strict fuel economy rules around the world.

Mazda hits Vegas with a pair of Sixes

Despite the fact that the annual SEMA show is more of an exercise in what "could be" than what "will be," it gives automakers the chance to stretch the legs of some of its most important models. Take the 2014 Mazda6, for example - it's hardly new, having gone on sale early this year - but this year's SEMA expo marks the first time Mazda has been able to show off the customization possibilities for its sleek midsize sedan. To that end, the Japanese automaker has arrived in Las Vegas with two very different takes on its sexy Six.
First up is the Mazda6 Club Sport you see above, wearing a "motorsports-inspired" gray, black and red accent-color scheme that, as Mazda says, is "represented in not-so-subtle angular lines reminiscent of a car speeding past your line of sight." The whole car is done up in a base color of Composite Grey, and uses a Brilliant Black roof to match the similarly colored front, side and rear diffusers, as well as the rear spoiler. Mazda has fitted the Club Sport with Rays 57 Motorsport G07FXX 20-inch wheels, wrapped in Yokohama 245/35R20 tires. Powering the CS is Mazda's 2.2-liter Skyactiv-D diesel four-cylinder engine (that we'll get in the standard Six early next year), and other changes include an H&R spring kit, larger Brembo brakes and a Racing Beat exhaust.
And then there's the Ceramic 6 Concept, pictured right. The name comes from the car's Ceramic White paint, though we don't really get the Taupe Silver accent stripes. Mazda says they're meant to mimic "the linear frequency patterns found on the likes of couture dresses and flowing fabrics," but it just looks a bit overwrought to us. The Mazda6 already has so many clean lines, why add more?