Black, Black Interior, on 2040-cars

Auto blog

Full 2016 Mazda MX-5 Miata pricing released

Take heart, roadster fans. The first 2016 Mazda MX-5 Miatas due for the US are now in production. To go along with that milestone, the Japanese automaker has finally released full pricing for the fourth-generation Miata. As previously revealed, the 2016 Miata in the base Sport trim starts at $24,915 (plus $820 destination), and for that outlay buyers get a 2.0-liter four-cylinder making 155 horsepower and 148 pound-feet of torque that's matched to a six-speed manual. The convertible comes standard with features like LED lighting and a Bluetooth-equipped audio system. For $1,075 more on all models, customers can spec a six-speed automatic gearbox, and keyless entry is another $130 but standard with the auto 'box. One rung up is the Club trim for $28,600, and it improves things with 17-inch wheels, a more aggressive body kit and a seven-inch touchscreen infotainment system. Order the manual trans, and the roadster gets a limited-slip differential, Bilstein dampers and a shock-tower brace. There's also a $3,400 package to make this version of the convertible even sportier with 17-inch BBS wheels, Brembo front brakes, side sill extensions and a rear bumper skirt. Among the regular trims, the top rung is the Grand Touring for $30,065 that adds luxuries like heated, leather seats, automatic climate control, rain-sensing wipers, and adaptive headlights. Mazda's i-Activesense is also standard and includes blind spot monitoring, rear cross-traffic alert and lane-departure warning. Finally, there's the Launch Edition, which is limited to 1,000 units, and it sells for $30,495 (or $31,570 for an automatic). All of them come in an exclusive combo of Soul Red with Sport Tan leather, and buyers get all of the Grand Touring's kit, plus standard keyless entry. The order site for these special roadsters opens on May 5, but hopefuls can pre-register now for a reminder. The first 2016 Miatas should hit dealers in late summer. That should provide some time for top down driving fun before it gets too cold. Related Video: U.S.-Bound 2016 Mazda MX-5 Miata Production Kicks Off Today - Mazda Also Announces U.S. Pricing for Entire MX-5 Lineup - IRVINE, Calif. (April 20, 2015) – The wait is almost over, as North America-bound 2016 Mazda MX-5 Miata production began today, signaling the imminent arrival of the next generation of the world's most popular two-seat roadster at U.S. dealers.

Sorry, rotary fans, Mazda's RX Vision probably won't happen

Mazda is doing a lot of things the right way in this age of beige-ness. It just crammed a turbocharged inline-four into the improved CX-9, a bold move unto itself, and one that should also be heartening for Mazdaspeed fans. Wouldn't that engine make for a swell Mazdaspeed3 or Mazdaspeed6? There's a reasonable ray of hope there, but not necessarily a guarantee. The RX Vision, though, is a pipe dream. Mazda is smart to keep the rotary dream alive. It's smart to keep developing it in back rooms and to keep the idea on the public's mind. Credit where credit's due: Mazda has solved some of the stickiest issues the rotary engine has, through savvy engineering and perseverance. We've seen promising patent filings for the Skyactiv-R engine, which is supposed to be found in the RX Vision concept. Mazda uses every opportunity to remind us that development is continuing and that the company would love to bring a rotary-powered sportscar to production. I believe it. But the RX Vision is just a design study. And there are some harsh realities about rotary engine emissions and fuel economy standards that are difficult for modern piston engines to achieve without expensive componentry. Emissions and fuel economy are both bugbears of the rotary, in case you've forgotten. And that explains Mazda's interest in running rotaries on hydrogen, but down that road lie infrastructure challenges as daunting as making a gasoline-powered rotary burn as clean as one of Mazda's Skyactiv piston engines. All this is meant to put Mazda's recent comments to Top Gear in context. Mazda's design director, Kevin Rice, spoke to TG at the Concorso d'Eleganza Villa D'Este, and was waving Mazda's rotary flag quite enthusiastically. "In the back rooms at Mazda, we're still developing it," Rice said, "and when the world's ready to buy another rotary, we'll be ready to provide it." I'd like that to be a comforting statement, but given the realities of fuel economy and emissions regulations and Mazda's position in the market, it seems like a hollow platitude. "When the world's ready" is just another way of saying "when we solve the fundamental issues with this engine layout, and there's an unambiguous market study that shows we can build these cars and make a profit, we'll consider it." That seems like a lot of "ifs". Perhaps Mazda does have a clean-burning, efficient, cheap-to-produce rotary running on an engine dyno in Hiroshima, and it's prepping an RX-9 for the next auto show.

Mazda expands scope of vehicles affected by Takata airbag recall to 330k

Earlier this week a Reuters report indicated that Mazda was considering a nationwide expansion of its recall for vehicles equipped with Takata airbag inflators. The company has now confirmed said expansion, with the vehicle count jumping from 86,770 to 330,000 affected in the US. As before, the affected vehicles are Mazda6 and RX-8 cars from the 2004 to 2008 model years. Mazda reports that Takata has tested a "large number of inflators removed from Mazda vehicles" and not found any to be "non-compliant" as of yet. With that said, the company also reports in its statement that one 2005 Mazda6, located in Florida, has been identified as having had an "abnormal" deployment of the driver's side airbag. For what it's worth, though the company's statement references the Takata inflator issue as a proper recall, it is calling its own program of notification a "Safety Improvement Campaign" for the moment. Find the full, if brief, Mazda press release in the form below. UPDATED MAZDA STATEMENT REGARDING TAKATA AIRBAGS Dec 11, 2014 WASHINGTON, DC (December 11, 2014) – In addition to the actions announced on December 4, 2014, as discussed in a separate document, Mazda today announced the following steps in the Takata recall: Mazda will institute a nationwide Safety Improvement Campaign of 2004-2008 model-year Mazda6 and RX-8 models equipped with certain Takata airbag inflators. The nationwide Safety Improvement Campaign will cover the driver's-side airbag inflator, as Mazda has not made a safety defect determination at this time. This action will support us to gather additional parts for examination and to promote customer satisfaction and safety. There are approximately 330,000 vehicles included in this Safety Improvement Campaign in the United States So far, Takata has tested a large number of inflators removed from Mazda vehicles, and NONE have been found to be non-compliant at this time One vehicle – a 2005 Mazda6 located in Florida – has been identified as having experienced an abnormal driver's-side airbag deployment. Mazda has worked closely with NHTSA on this situation Mazda will participate in the independent, industry-wide joint testing program for Takata airbag inflators For history, on December 4, 2014, Mazda announced: It would expand the area of the high-temperature, high-humidity region recall to include the Gulf Coast states.