2008 Mazda Speed3, 263-hp 2.3l 4 Cyl, 6-spd Manual, Factory Navi, Only 36k Miles on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Next Mazda CX-9 spied for first time

After plenty of rumors, we finally have our first look at the second-generation Mazda CX-9. Development of the crossover look to be very far along based on these of production bodies hidden under form-fitting camouflage. The overall aesthetic, based on what we can see here, is very much in keeping with Mazda's handsome Kodo design language. The CX-9 you see here looks pretty much like a Mazda3 scaled up about 279.3 percent, with a five-pointed grille and expressive headlights prefacing a sculpted, swooshy body. In back, there's an aggressively raked rear window that won't do any favors for cargo capacity, but makes for a handsome silhouette. And if previous Mazdas are any indication, we'd expect the CX-9 to feature a very handsome, high-quality cabin, although it's impossible to see in these images. According to our spy photographers, the new CX-9 will abide by Mazda's Skyactiv philosophy, which should make for both an entertaining an efficient three-row crossover. A 2.5-liter, turbocharged four-cylinder will be the engine of choice, replacing the antiquated V6 of the current model, and will be available with an all-wheel-drive system. While this engine is slated for the CX-9, enthusiasts should take note that this first Skyactiv turbo will likely form the basis of future Mazdaspeed efforts. As previously reported, the CX-9 will make its debut this November at the 2015 Los Angeles Auto Show as a 2017 model. Should any info pop up before then, expect to see it here.

Mazda CX-5 in auto-brake accident on Japanese test drive

As we slowly march towards a world where our cars will drive for us, there will be mishaps. Systems will act up, not behave has intended or we'll simply forget to turn them on. We all remember when Volvo tested the S60's City Safety system. Now Mazda has had an issue of its own.
During a test of a Mazda CX-5's Smart City Brake Support on a dealership lot in Japan, a prospective customer and a dealership employee were injured when they hit a urethane barrier used for testing the system. According to Bloomberg, which spoke with the Saitama Prefectural Police, the impact with the barrier left the customer with an injured neck while the dealership employee suffered a fractured arm. Considering the injuries, we imagine this wasn't a small barrier.
"For any safety function, it's impossible to be 100-percent free of accidents. These technical functions aren't always the easiest to understand," IHS Automotive auto parts analyst, Hiroshi Ataka told Bloomberg.