2002 Mazda Tribute Es 4x4 V6, One Owner, Clean Carfax, Low Miles on 2040-cars

Auto blog

2016 Mazda CX-9 First Drive

Automotive enthusiasts tend to obsess over spec sheets. How else could we know which cars and trucks are the quickest in a straight line, hold the road with the greatest tenacity, or tow the biggest trailers? More succinctly, what ammunition would we have in the seemingly endless back-and-forth of Internet forums if it weren't for specifications? Mazda's engineers think they've found a better way. The 2016 CX-9 has less horsepower than its primary competitors. The only engine available is a turbocharged four-cylinder, hooked to a six-speed automatic. Drivers won't miss the 23 horsepower (or more, as we'll soon explain) lost in the changeover from 2015 to 2016, because Mazda applied its holistic Skyactiv approach to the largest vehicle it offers. That means less weight and, ultimately, more fun. Or so they say. Are they right? Yes. And no. Most of the time, in normal on-road driving conditions, the 2016 CX-9 is the most fun you can have with three rows. But the real-world tradeoff didn't go off completely without a hitch. Reasoning that real-world performance is more important than ultimate horsepower, Mazda specified a four-cylinder for its big, three-row SUV instead of a more traditional V6. Let's get those all-important specifications out of the way: All 2016 Mazda CX-9s are fitted with a 2.5-liter turbocharged four-cylinder with 250 horsepower and, impressively, 310 pound-feet of torque at just 2,000 rpm. Unless you decide to use 87 octane, in which case you'll be limited to 227 horsepower. Mazda doesn't think owners will actually notice the difference in power levels, so there's no Premium Fuel Recommended sticker on the back of the fuel door. Mazda utilized some clever turbo trickery to deliver a diesel-like torque curve from its gasoline-fueled engine, which makes the small-displacement powerplant feel lively at low engine speeds. The flipside is that the CX-9 runs out of breath as the needle swings across the upper reaches of the tach. While that simply wouldn't do for a sportscar like the MX-5, in the CX-9 it's not necessarily a deal breaker. One benefit to the downsized engine is that it doesn't guzzle fuel. The EPA rates the CX-9 at 22 miles per gallon in the city and 28 on the highway. Drop one mpg all around for the all-wheel-drive model. Those figures beat out all the CX-9's most natural competitors, including the Honda Pilot and Toyota Highlander. The turbo-four Ford Explorer matches the 28-mpg highway figure, but loses by three in the city.

Mazda planning 'aggressive' dealer shakeup

Mazda has set an ambitious goal of selling 400,000 units by the end of the 2015 Japanese fiscal year in March 2016, and to do that, it's going to need to take some aggressive action. That means that underperforming members of its 637-showroom strong dealer network are about to get the axe.
The purge won't just be limited to dealers that aren't performing, though. Mazda will seek to consolidate poorly located dealers and build new showrooms in better locations. It still isn't clear how many dealers are being targeted or at what point Mazda would end its cull.
This consolidation of dealers is all part of a one-two punch for the Japanese brand, that will also see increased marketing efforts in 35 key areas. Of those markets, Mazda is placing a special emphasis on New York and LA, although there's not much mention of what other regions are being looked at.

Mazda recalling 190,000 CX-7s due to rusty ball joints

UPDATE: This post has been updated with additional information from Mazda. The Basics: Mazda is recalling 190,102 Mazda CX-7 crossovers built between February 14, 2006, to May 9, 2012 – model years 2007 through 2012. The Problem: Water can sneak in between the suspension ball joint fittings. If snow and road salt are common in your neck of the woods, the joints can corrode and separate from the lower control arms. That's bad if you enjoy steering your CX-7. According to Mazda, owners of affected models may notice a rattle from the front suspension due to the loose ball joint in the lower control arm fitting. Mazda describes separation of the ball joint and control arm as a "worst case" scenario "after extended operation in such condition." Injuries/Deaths: It's unknown if the rusting issue has led to any crashes, injuries, or deaths. Autoblog has a call into Mazda for additional details and will update this post with any new information. There have been no reports of accidents, injuries, or fatalities related to this recall. The Fix: Owners should report to their local Mazda service center, where techs will replace the both front lower control arms. Any work done is free of charge. If you own one: Mazda will perform some automotive triage with this recall, focusing on CX-7s that have had the longest exposure to salt and are most likely to suffer control arm separation first. Owners of 2007s and 2008s come first, followed by 2009 through 2011 models. Mazda will also focus on vehicles registered in states where snow and road salt are most common – Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, D.C. If you live in a more temperate region or own a 2012 CX-7, Mazda will perform recall work as "parts are available." Owners can contact Mazda customer service at 1-800-222-5500 for additional info. Recall notices should hit the mail around October 10th. Related Video: Featured Gallery 2011 Mazda CX-7: Review View 21 Photos News Source: NHTSAImage Credit: Copyright 2016 AOL Recalls Mazda Crossover mazda cx-7