2007 Mazda Rx-8 Grand Touring on 2040-cars

Auto blog

2014 Mazda6 i-Eloop to net 40 mpg hwy, 28 mpg city

Even before Mazda unveiled the 2014 Mazda6, it had introduced its innovative, non-hybrid i-Eloop (Intelligent Energy Loop) brake regeneration system. This technology converts kinetic energy into usable electricity using the alternator, a DC/DC converter and a capacitor mounted just behind the front fascia. During deceleration, the alternator captures energy that is then stored in the capacitor, which can later be used to directly power electric devices like climate control and audio systems. When i-Eloop power is used, it reduces the load on the engine and helps to conserve fuel.
Now available on the Mazda6, i-Eloop is only available on the $29,695 Grand Touring trim level as a part of the $2,080 GT Technology Package, meaning that buyers desiring i-Eloop will have to spend at least $31,775 (not including destination). The added price of this technology should be worth it for those looking for optimal fuel economy as the i-Eloop, combined with the package's active grille shutters, will bump the sedan's fuel economy numbers up to 28 miles per gallon city and 40 mpg highway - both are improvements of 2 mpg over the standard Mazda6 Grand Touring. The GT Technology Package also includes a Sport mode, lane departure warning, high beam control, radar cruise control and forward obstruction warning - the latter two technologies are currently offered in a $900 package that is being discontinued.
i-Eloop will eventually be offered on other Mazda products including the 2014 Mazda3. Scroll down for the official press release on the Mazda6's fuel-saving i-Eloop technology.

Evo blasts around in a Spa 24H-winning Mazda RX-7

Think of the Mazda RX-7 today, and your thoughts likely turn to the turbocharged third-generation version of the '90s that's an icon among the tuning and drifting communities. Many years before that swoopy coupe was hanging the tail out, the first model of RX-7 was also quite a track star, though. Evo's Richard Meaden has gotten ahold of a race-prepped version that counts a victory in the 1981 Spa 24 Hours to its name – the first Japanese car to claim that honor – for a fantastic video. With 225 horsepower and weighing around 1,984 pounds, this RX-7 doesn't look like a giant killer on paper. However as Meaden illustrates, the coupe puts those rotary-powered ponies to very good use. Driving it requires constantly keeping things on the boil because the muscle is essentially absent below 7,000 rpm. Once in the sweet spot, things start progressing quickly, though. As a wonderful cap to the wall of noise from the engine, little licks of flame also shoot out of the exhaust on downshifts. Thankfully, Evo's video team captures all of the mechanical noises quite well, and the clip is a treat for those with a good pair of headphones. Despite the race-winning pedigree, Meaden has no problem grabbing the little coupe by the scruff of the neck. He chucks it through the corners to get the tail loose, and the little wisps of smoke from the rear tires prove the original RX-7 knows how to drift too. These early cars definitely worth being remembered in the pantheon of Mazda performance.

Mazda recalls 1.37 million older vehicles for ignition switch short [UPDATE]

UPDATE: Mazda has confirmed to Autoblog that NHTSA's figures and list of effected models are accurate. Mazda is recalling 1,368,500 older vehicles in the US that date as far back as the late '80s because a potential short circuit in the ignition switch could cause a fire. According to the National Highway Traffic Safety Administration, the models include: 1990-1995 323 1993-1998 626 1993-1995 929 1989-1998 MPV 1993-1997 MX-6 1992-1993 MX-3 1990-1998 Protege Mazda reports that over time the grease around the switch's contact points can carbonize and become conductive, which can eventually lead to a short circuit. In some cases this results in smoke, but it could also lead to a fire. According to company spokesperson Tamara Mlynarczyk to Autoblog, there're no accidents, injuries, or fires in the US. Once the vehicle is running, the potential fault also doesn't affect drivability. Documents from NHTSA (as a PDF), indicate there was a fire in one of these vehicles in Japan in 2002 that could have been linked to this issue. The recall should begin in December. In its announcement of the issue below, Mazda reports 1.2 million vehicles affected and includes the 1990-1996 323/Protege. Autoblog has reached out to the company to understand the discrepancy. Related Video: RECALL Subject : Ignition Switch may Overheat Report Receipt Date: OCT 19, 2015 NHTSA Campaign Number: 15V674000 Component(s): ELECTRICAL SYSTEM Potential Number of Units Affected: 1,368,500 All Products Associated with this Recall Vehicle Make Model Model Year(s) MAZDA 323 1990-1995 MAZDA 626 1993-1998 MAZDA 929 1993-1995 MAZDA MPV 1989-1998 MAZDA MX-6 1993-1997 MAZDA MX3 1992-1993 MAZDA PROTEGE 1990-1998 Details Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat. CONSEQUENCE: If the ignition switch overheats there would be an increased risk of a fire. REMEDY: Mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall is expected to begin December 15, 2015. Owners may contact Mazda Customer Experience Center at 1-800-222-5500, option#6. Mazda's number for this recall is 8715J.