2004 Mazda Rx-8 Base Coupe 4-door 1.3l Low Miles on 2040-cars

Auto blog

Mazda G-Vectoring Control makes driving better without you knowing

Mazda has just spent eight years developing a new technology that will make its new cars a lot more fun to drive, even if you have absolutely no idea that it's working. And subtlety's the point, Mazda engineers told us at a press event at Mazda Raceway Laguna Seca. In fact, the effects of what they've dubbed G-Vectoring Control are so fine that the marketing and PR teams are at a loss for how to do their jobs with it. "The engineers have done their work," said Mazda Director of Communications Jeremy Barnes, "But how do we get the message across?" The basic premise is this: G-Vectoring activates only when the car's on-board computer reads simultaneous steering and throttle input. The data — including throttle position, steering angle, and, crucially, how quickly you're adjusting the steering angle — are then funneled through an algorithm to reduce engine torque, which transfers vehicle weight, adding more grip to the wheels that need it. The system will appear first on 2017 Mazda6 sedans arriving in showrooms later this year, followed by the 2017 Mazda3. Actually, "subtle" does not even begin to describe the effect. G-Vectoring Control can detect as much as one tenth of one degree of steering angle, and changes the cornering forces only 0.1 to 0.5 g as a result. "That's less than the human body can feel," explained Vehicle Development Engineer Dave Coleman. In practice, G-Vectoring reduces the steering angle at turn-in, as well as the rate at which one turns the wheel. To demonstrate, Director of R&D Kelvin Hiraishi rode shotgun with us in a specially equipped Mazda6 that allowed him to turn G-Vectoring on or off at the push of a button (production cars will always have it on). Hiraishi had us drive a number of courses, including Mazda Raceway Laguna Seca itself, while an engineer measured our steering inputs with a laptop Matrix'd into the car's electronic brain. I drove the same course several times with the same car in the same conditions, with cruise control locked and the system turned on or off. Lo and behold, with G-Vectoring activated, the engineer's output graph showed that my steering inputs were indeed reduced ever so slightly. There were two times that G-Vectoring was markedly noticeable. The first on a turn with a minor banking toward the outside, and the second was during cornering over an artificially wet section of the course — in other words, when the car was at the limits of adhesion.

Mazda going back to oval grille with next MX-5 Miata

The original Mazda MX-5 Miata was distinguished by an oval grille - a design trait that gradually evolved into the smiling cat face on the latest model. But Mazda, according to the latest intel, is planning on returning to that oval grille with the new model in the works.
The revised grille will cap a slightly longer form than models past, while still keeping weight down to a minimum. The stretched wheelbase was reportedly adopted in order to meet the requirements of Alfa Romeo, which is jointly developing the new platform together with Mazda for use on a new roadster of its own.
The new Miata is expected to adopt the 1.5-liter Skyactiv four found in the Mazda3, albeit returned to rev higher and deliver more power and torque, mated to either a six-speed manual or automatic. The Alfa version, meanwhile, is expected to use a 1.4-liter turbo four with a dual-clutch transmission. Sources anticipate the new MX-5 to debut first, possibly at the 2015 Chicago Auto Show a little less than a year from now.

Mazda and Fiat finalize deal for Alfa roadster, next-gen MX-5 Miata

Although a little bit later than expected, Mazda and Fiat have signed a final agreement that will bring a next-generation MX-5 Miata to the Japanese automaker and a new roadster to Alfa Romeo. When the proposed arrangement was announced back in May, the two automakers had hoped to seal the deal last year, but it doesn't appear that the production timeline for these cars has slipped any, with both expected to start rolling off assembly lines in 2015.
Other than a shared chassis with a rear-wheel-drive layout, it sounds like the two cars are still planned to be distinct in their own ways from their styling right down to their engines. Mazda will produce both cars at a plant in Hiroshima, Japan, but it isn't clear what role each automaker will play in the cars' developmental process. The big question, of course, is what clever portmanteau name we can come up with, like Toyobaru. Mazda Romeo is the easy choice, but Alfazda might roll off the tongue a little better.
Scroll down for a brief press release from both automakers.