2004 Mazda Rx-8 Base Coupe 4-door 1.3l 6 Speed Super Clean on 2040-cars

Auto blog

2016 Mazda MX-5 Miata first in-car observations

We've had few days to digest the all-new 2016 Mazda MX-5 Miata since the roadster was first revealed on Wednesday evening when we offered you our first impressions. Since that time, we've gone back and looked at the car a number of times in person here in California, and we've even seen it briefly run under its own power (okay, it was more of a saunter). What we didn't get the chance to do at the reveal, however, was sit inside the car. We've since been able to remedy that, and while we haven't been allowed to drive the new roadster, we do have some initial in-car impressions to share with you.
First, the location and feel of the major controls is quite excellent. The three-spoke steering wheel is an MX-5 specific item - it's not shared with any other Mazda. That's vital, because others would likely be too big in diameter or have the wrong rim thickness. The wheel's redundant controls seem to be well laid out and the airbag boss is very small. The column tilts, but unfortunately and somewhat inexplicably, it still doesn't telescope.
Pedals are well-spaced, and the six-speed manual has the same short throws and positive engagement that we've come to know and love.

Next Mazda CX-9 spied for first time

After plenty of rumors, we finally have our first look at the second-generation Mazda CX-9. Development of the crossover look to be very far along based on these of production bodies hidden under form-fitting camouflage. The overall aesthetic, based on what we can see here, is very much in keeping with Mazda's handsome Kodo design language. The CX-9 you see here looks pretty much like a Mazda3 scaled up about 279.3 percent, with a five-pointed grille and expressive headlights prefacing a sculpted, swooshy body. In back, there's an aggressively raked rear window that won't do any favors for cargo capacity, but makes for a handsome silhouette. And if previous Mazdas are any indication, we'd expect the CX-9 to feature a very handsome, high-quality cabin, although it's impossible to see in these images. According to our spy photographers, the new CX-9 will abide by Mazda's Skyactiv philosophy, which should make for both an entertaining an efficient three-row crossover. A 2.5-liter, turbocharged four-cylinder will be the engine of choice, replacing the antiquated V6 of the current model, and will be available with an all-wheel-drive system. While this engine is slated for the CX-9, enthusiasts should take note that this first Skyactiv turbo will likely form the basis of future Mazdaspeed efforts. As previously reported, the CX-9 will make its debut this November at the 2015 Los Angeles Auto Show as a 2017 model. Should any info pop up before then, expect to see it here.

Mazda patents show rotary engine for range-extended EV

Two years ago, Mazda introduced a fascinating range-extended electric car called the Mazda2 RE Range-Extender. It took an electric Mazda2, and dropped in an itty-bitty 330cc rotary engine. It wasn't the rotary-powered sports car we had hoped for, but it seemed like a unique way to keep the quirky engine alive and kicking. But not long after the car's reveal, it seemed to disappear. Now the basic idea has resurfaced with a few modern updates in a couple of US patents. The first patent is pretty straightforward and describes a range-extended EV similar to the BMW i3. At the front is an electric motor driving the front wheels. At the back is an internal combustion engine that powers an electric generator. In the middle is a lithium-ion battery for storing and delivering electricity. It's the same set-up as that Mazda2. The second patent is for an engine start-and-stop system, but specifically for rotary engines. The system is designed to shut off a rotary engine when not needed, much as modern piston engines do. It also stops the rotor in a position that closes the intake port to ensure no fuel or exhaust emissions slip out through the intake tract. This is necessary since there are no valves in a rotary, and air and exhaust come through ports that are "opened" and "closed" by the rotor itself. The patent also describes the possibility of firing a spark plug after the fuel has been cut to eliminate any leftover fuel emissions. This system would theoretically improve a rotary engine's fuel economy and emissions significantly, which would be a boon as those are two of the rotary's major weaknesses. The rotary-engine patent also includes the same range-extended powertrain drawing as the first patent. It's there as a description of a possible application. And in such an application, where the rotary wouldn't have to run all the time, the system could take advantage of the rotary's inherent strengths. Weight can be kept low thanks to the engine's small dimensions, which should help in keeping the car sprightly and efficient. Rotaries are renowned for smoothness, too, so it shouldn't need too much refining and sound deadening, the latter of which adds more weight. The small size would also help with packaging, leaving more space for people, cargo, or possibly batteries. And since it has been patented, the company may be looking to bring the system to market.