Rare, All Original Spark Yellow 79 Mazda Rx7 Gs 62k on 2040-cars

Auto blog

Mazda's new turbo four fits in both the 6 and the 3

Despite the size differences, the Mazda CX-9 shares a lot with its smaller car-based siblings, the Mazda6 and Mazda3. That could allow Mazda to slot its full-sizer's new 2.5-liter, turbocharged four-cylinder engine under the hood of its smaller offerings. Pardon us while we do a happy dance. "[The 2.5-liter turbo] fits in a lot of our cars, and where we're actually going to put it is another question," Mazda North America vehicle development engineer Dave Coleman told Australia's Car Advice. Coleman specified that the turbocharged engine will fit in all the same applications that can accommodate the company's 2.5-liter gas and diesel engines. "Basically, that big space we used for the bundle of snakes exhaust manifold, the turbo is in that space too. They're all packaged to occupy the same space. It's exactly the same clearance as the exhaust manifold of the other engines." This kind of logic – if Engine A is the same size as Engine B, then both should fit in Car C – is what's lead us to imagine a turbocharged Mazda6 since the new engine was announced. In short, it's great news. Mazda's 2.5-liter turbo is a hell of an engine in the CX-9, and it's hard to imagine it'd be worse in a lighter vehicle. But just because it works from an engineering standpoint doesn't mean it's going to happen. At least, not soon. "It fits. I'm not a product planner so I don't get to make that call," Coleman told Car Advice. "It's up to the product planners to decide what they're going to put it in." The most obvious application for a turbocharged engine in the 3 or 6 is as a reborn Mazdaspeed model. But don't get too excited – Coleman said Mazda hasn't even gotten as far as building an engineering prototype with this engine. We're still firmly at the theoretical stage. And that's bad news, because it gels with what we've been reporting – that Mazda will wait a generation for future Mazdaspeed models. We just stopped doing our happy dance. Related Video:

Mazda3 Skyactiv-Hybrid and CNG Concept shown in Japan

Mazda has received a tremendous amount of public and industry praise in the last few years, following up the successful introduction of its Skyactiv technology (powertrain and otherwise), with strong products like CX-5, Mazda6 and most recently, the Mazda3. At the Tokyo Motor Show, Mazda has taken yet another step forward with Skyactiv and the 3, showing the compact (called "Axela" in Japan) with an all-new compressed natural gas engine in the Skyactiv-CNG Concept.
The end result of the Skyactiv-Hybrid is fuel consumption estimated at something like 74 miles per gallon.
Mazda thinks that CNG-powered vehicles are due for an uptick in demand, and the company believes this new powertrain will add valuable breadth to the Mazda3 range. The CNG Concept is actually a duel-fuel vehicle, capable of running on either natural gas or gasoline. In fact, we're told that the high compression ratio (14:1) inherent in Skyactiv-technology gasoline engines makes conversion to CNG particularly simple.

More head-up displays are coming to a dashboard near you

With the exception of Apple products — $1,000 for a freakin' smartphone? — one great thing about tech is you typically get more for your money with each passing year. This is particularly true with automotive tech: Features like driver assists and surround-view cameras that were once exclusively available in luxury vehicles now come standard even on some economy cars. The same thing is slowly happening with head-up displays (HUD). For example, the 10-inch HUD in the 2018 Toyota Camry is one of the largest and best HUDs I've seen in any car. And a big improvement on the much smaller HUD in the latest Toyota Prius. Mazda is another mainstream brand that offers HUDs in several of its vehicles. But instead of embedding expensive components in the dash and using a special windshield, the HUDs in the Mazda3 and Mazda6 use a thin plastic lens that folds down when not in use. MINI has a similar solution, but this low-cost approach has limits in terms of size and position of the images compared to traditional HUDs that use the windshield as a screen. We're also starting to see similar lens-based aftermarket options that can be added to any car. Last year I tested a portable HUD called Navdy that taps into a car's OBD-II port to provide info on speed and RPM and uses built-in GPS and Google Maps to show the surrounding area, display speed limits and route you to your destination. Navdy also connects to an Android or iOS smartphone via Bluetooth to display data from phone calls, texts and music playing on a connected device, and it's simple to use and easily visible in almost any lighting condition. While Navdy is still available online, late last year the company ran into financial difficulties, and product support has been halted. I recently tested a new portable HUD called Hudly that's not quite fully baked and falls short of Navdy because it doesn't tap into an OBD-II port. Since a companion smartphone app for Hudly isn't scheduled to launch until next month, for now it only mirrors what's on a smartphone. So it can be used for nav and other apps, and its features are very limited. Between automakers adding HUDs in more reasonably priced cars and the aftermarket filling in the gaps for existing vehicle owners with add-ons, the technology is becoming more prevalent and affordable. And it's also getting better.