1984 Mazda Rx-7 on 2040-cars

Auto blog

Fiat version of Mazda MX-5 Miata to be called 124 Spider

Fiat has a definite use for its recent US trademark on the 124 Spider name, and it's something that should make many performance fans quite happy. FCA CEO Sergio Marchionne confirmed to Auto Express that the Italian brand's future roadster would bear the classic name. Auto Express reportedly asked Marchionne directly about the convertible at the 2015 Geneva Motor Show. The CEO said: "Do we want to do it now?" After another executive verified the name, Marchionne responded: "There you go – a world class premiere right in this room!" Autoblog reached out to Fiat Brand communications boss in the US Ariel Gavilan for more information, and he verified the story. Gavilan said that brand head Olivier Francois confirmed the 124 Spider name to international media during a briefing in Geneva. FCA isn't going quite so far as officially confirming that the 124 Spider shares a platform with the latest Mazda MX-5 Miata, but that's almost a certainty. The two automakers jointly developed the chassis, and the original plan was for it to underpin an Alfa Romeo. However, Marchionne didn't want an Alfa assembled outside of Italy. Fiat even hinted at this possible change as far back as the corporation's five-year plan last summer. Insiders tell Auto Express that the 124 Spider reportedly carries retro-inspired style, and hopefully, that means the roadster evokes the look of the original 124 Sport Spider (pictured above) by Pininfarina. Fiat allegedly is also aiming for a weight less than 2,205 pounds, and the engine range is likely comprised of versions of the brand's 1.4-liter turbo. The mill already pumps out 160 horsepower and 183 pound-feet of torque in the Fiat 500 Abarth in the US. According to Auto Express, Fiat and Mazda have an agreement to launch the Miata in 2015 and the 124 Spider in 2016. A hotter Abarth version could come along eventually, too. Related Video:

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Mazda CX-5 getting mild refresh

Mazda has found both critical and commercial success with its CX-5 small crossover, and seems to be endeavoring to keep the momentum up with an upcoming refresh. As you can extrapolate from the obvious lack of the usual camouflage, the company isn't reinventing anything in the very near future of the CX-5, but it does seem as thought some tweaks are in the works.
Lighting elements fore and aft appear to have gone under the knife, with the front grille and rear fascia also seemingly to be slightly revised. The side mirrors now look slicker and slightly more upscale with their integrated turn signals, as well.
In all, expect a look that's a touch fresher, without being a radical departure from the existing visage.