2000 Mazda Protege Lx Sedan 4-door 1.6l on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Junkyard Gem: 1981 Mazda RX-7

The first-generation Mazda RX-7 was sold for the 1978 through 1985 model years, and for decades you'd see and hear these nimble little sports cars buzzing around American streets. Then, well, the apex seals went out, or owners tired of a 2,400-pound car that drank fuel like an Eldorado, or the floor pans were eaten by the Rust Monster... and then nearly all of them were gone. Enough of them remain, however, for a steady trickle to show up with depressing regularity in self-service wrecking yards. Here's a pretty solid '81 that I found in a Denver yard last month. The 12A Wankel engine in this car made 100 hp and 105 lb-ft of torque, which was very good for 1981 (considering that you could buy a new Camaro with a 115-horsepower V8 that year). The $9,385 RX-7 looked like an especially good value when compared to, say, the $11,299 Datsun 280ZX or the $8,997 Fiat 124 Sport Spider, being much lighter on its feet than the former and much quicker than the latter. View 12 Photos If you have ever considered getting one of these cars, move fast before all the restorable ones are gone! Auto News Mazda Automotive History mazda rx-7

Mazda RX-7 could return in 2020

We like writing about the next Mazda RX-7 because it's like writing about the Chupacabra, Slenderman, or the Florida Skunkape, all of which are imaginary creatures seen by someone who knew someone who had an uncle whose dead great-grandfather's sister took a picture of it, invariably at night, while she was drunk, with her 1933 Kodak Brownie. Autocar is the latest with an RX-7 revival, saying it could come as soon as 2020 to celebrate Mazda's 100th anniversary. Before we get to that, let's take a brief look at RX-7 rumors. In 2009 there was speculation we'd get a concept RX-7 at the Tokyo Motor Show. That same year it was predicted the RX-8 would die to make room for a new RX-7 in 2012. In 2010 Mazda was developing a 300-horsepower rotary for the RX-7 that could run on gasoline or diesel and had better fuel economy and less oil consumption. Then Autocar said we could get the new RX-7 by 2013, a rumor that turned into a new RX-9 based on the Mazda MX-5 Miata platform. In 2012 the potential arrival date had become 2017. In 2013 the company CEO Masamichi Kogai said the equivalent of "Not gonna happen," and he said it again last year, just 90 days ago. It should be clear by now that this car is Mazda's version of the Lotus Esprit. Whew. Now that we're clear on all that, what does Autocar say? That a follow-up to the extinct RX-8 is coming that will sit on the new MX-5 Miata platform, and Mazda's vice president of European R&D said there are still 30 engineers working on rotary engines in partnership with universities. The successor will be front-engined and rear-wheel drive, have either two seats or 2+2 seating, and could be called RX-6, RX-7, or RX-9. That sounds like three distinct statements, only one of which is definitely true, that could possibly just maybe add up to a new RX-7, but could even more likely add up to a rotary-engined concept car that never sees production. We've only got five more years to wait, and since we've been begging at the RX-7 doors this long... Related Video: News Source: Autocar Rumormill Mazda Coupe Performance rotary rotary engine mazda rx-7