2000 Mazda Protege Lx Sedan 4-door 1.6l on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Mazda to reveal MX-5 Miata Club Edition in New York

Mazda is bringing a new version of its latest MX-5 Miata to the New York Auto Show. And while it's giving us very little to go on at the moment, from what we can tell so far, it looks promising. For starters, it's called the Club Edition, which speaks to us of enhanced performance – particularly on the track. For another, the statement below highlights the "maximum driving enjoyment" the existing MX-5 was "designed to deliver," and then proceeds to claim that the Club will "amplify that experience, harking back to the early lightweight sports cars that inspired it, but serving as a beacon for the future as a thoroughly modern, sophisticated package." Hopefully, then, it'll serve as some sort of road-going mid-point between the stock version and the Global Cup racing concept pictured above. We'd expect the 2.0-liter four-cylinder engine to carry over likely unchanged with its 155 horsepower and 148 pound-feet of torque, but with the potential addition of a stiffened suspension, upgraded rolling stock, revised aero, enhanced cockpit and maybe some excess weight trimmed out – although the new Miata doesn't have much to lose as it is. In any case, we're excited. Related Video: 2016 MAZDA MX-5 MIATA CLUB EDITION TO DEBUT AT NEW YORK INTERNATIONAL AUTO SHOW - 2016 MX-5 Club represents most aggressive road-going version - IRVINE, Calif., March 25, 2015 /PRNewswire/ -- Ready to join the Club? The 2016 Mazda MX-5 Miata Club edition, that is. Mazda North American Operations (MNAO) will be introducing the North American-spec MX-5 Club next week at the New York International Auto Show. The MX-5 Club represents the most aggressive road-going iteration of Mazda's fourth-generation flagship roadster. The 2016 MX-5 sheds approximately 150 lbs. from its predecessor through use of lightweight, efficient SKYACTIV®1 TECHNOLOGY, now weighing 2,332 lbs. when equipped with the standard SKYACTIV-MT six-speed manual transmission (2,381 lbs. with the six-speed automatic). Powering all North American models will be a 2.0-liter SKYACTIV engine, rated at 155 horsepower and 148 lb-ft of torque. Shorter than the first-generation MX-5 that initially graced U.S. shores in 1989, yet wider than the outgoing model and with its engine lower and farther back in its chassis, the 2016 MX-5 is designed to deliver maximum driving enjoyment.

Mazda Raceway gets first new MX-5 Cup as pace car

Mazda's motorsports department officially finished the first example of its new MX-5 Cup racer. But while the rest of the fleet will be used in the Global MX-5 Cup championship, this initial unit has been designated for another purpose. It's been dedicated to serve as the new pace car for Mazda Raceway Laguna Seca. Based on the latest ND-generation MX-5, the Cup racer was previewed in racing spec this past November ahead of its debut at the SEMA show. Though we've still yet to see the final spec sheet, it clearly benefits from key upgrades to the rolling stock, not to mention the added roll cage, racing buckets, and more. The pace car also features emergency lighting and a livery designed by Mazda and applied by Sticky Fingers Design out of Huntington Beach, CA. The beefed-up little roadster will join a cadre of pace cars used at the legendary Northern California circuit. Other pace cars in the fleet include a Mazda6, RX-8, CX-5, and the previous Miata. The season is winding to a close at Laguna Seca, with the Pirelli World Challenge finale and Mazda Road to Indy still set to take to the track next month. Related Video: MAZDA RACEWAY IS READY TO PACE THE FUTURE MONTEREY, Calif. (August 13, 2015) – Mazda Motorsports used the annual car-fest known as the Rolex Monterey Motorsports Reunion to roll out the first production 2016 Mazda MX-5 Cup race car. This particular vehicle is guaranteed to lead races as it will be the newest pace car in the Mazda Raceway Laguna Seca fleet of Mazda safety vehicles. The 2016 Mazda MX-5 Cup race car follows a 26-year history of the MX-5 Miata in motorsports. The first race cars to be sold to customers will be used in the 2016 Global MX-5 Cup, known in the U.S. as the Battery Tender Mazda MX-5 Cup. With the 2016 racing season still many months away, placing the first production race car into pace car duty allows Mazda to gather additional durability data while showcasing it in front of one of the most influential motorsports crowds of the year. "For Mazda, this weekend is the perfect blend of past, present, and future," noted John Doonan, director of motorsports for Mazda North American Operations. "We are celebrating our motorsports heritage on the track with our vintage race cars.