2015 Mazda Mazda6 I Touring on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

2014 Mazda CX-5 with 2.5-liter Skyactiv engine

Back in October, we compared the relative merits of two new and very good small crossovers: the 2013 Ford Escape and 2013 Mazda CX-5. The CX-5 we tested then had Mazda's 2.0-liter Skyactiv-G engine under its hood, and it managed to just edge out the EcoBoosted Ford despite being down by some 23 horsepower and 34 pound-feet of torque. Had it been available, the 2.5-liter Skyactiv engine that we recently had the opportunity to try out in the 2014 Mazda CX-5, it may have made that comparison even easier to call in the Japanese CUV's favor.
Clearly, if you're in the market for a reasonably sized crossover, the CX-5 should, at the very least, be on your test-drive list. The new engine offering will let buyers opt for a stronger powerplant, with 184 hp and 185 lb-ft on tap. On our second day in Austin's Hill Country - the first was spent quick-spinning the 2014 Mazda6 i Sport, you'll recall - we covered a couple of hundred miles and put the new CX-5 through its paces; here's what we turned up.
Driving Notes

Mazda begins building Mazda3 in Mexico for US

With fluctuations in international currencies and rising shipping costs to take into account, foreign automakers can't get away with building cars overseas and selling them in North America as easily as they used to. Particularly with inexpensive mainstream models. And given the benefits of cheaper labor and free trade under NAFTA, many have opted to assemble their cars for the North American market in Mexico. That's why the likes of Toyota, Mercedes and BMW have all opened plants in Mexico. And now Mazda has followed suit.
Ground was initially broken for Mazda de Mexico Vehicle Operations at Salamanca in the state of Gunajuato back in 2011, but production has just now gotten under way. The first vehicle to roll off the line? A Mazda3 sedan destined for the United States. Soon, the plant will begin production of the next Mazda2 as well, selling it alongside its larger counterpart across the Americas and in Europe as production expands to 230,000 units annually. For more information, see the official press release below.