2012 Mazda Mazda6 I Touring on 2040-cars

Auto blog

Production Mazda Vision Coupe concept, GRMN Supra, new BRZ/86 coming

After writing about what's in store for the next-generation Subaru WRX, Japan's Best Car magazine is back with more spy work on what's ahead for the coming Mazda sedan, fighting-spec GRMN Toyota Supra, and next-generation Subaru BRZ/Toyota 86. All three are supposedly headed for previews at this year's Tokyo Motor Show before rolling out in 2021 and 2022. Mazda showed the Vision Coupe concept at the 2017 Tokyo show, then sneaked a mention of a rear- and all-wheel drive "Large Architecture" and two inline-six engines into a 2019 investor's report. Best Car says that concept's production version will house a 3.0-liter Skyactiv-X SPCCI inline-six with "M-Hybrid" 48-volt assistance. Output figures remain a mystery, but the mag says engineers are aiming for 345 horsepower. The real deal isn't slated for dealers until 2022, bringing what Mazda bills as a "BMW, Audi quality car at the price of Volkswagen." A further treat: Best Car says the Hiroshima automaker is laying out a two-door version on the same platform. Not even a month after 2020 Toyota Supra chief engineer Tetsuya Tada told us, "With a sports car, the promise is to offer more performance with each additional version," this report says the full-fat GRMN Supra will raise the stakes. Expected in the latter stages of 2021, the current 335-hp Supra will get an "output eventually close to 400 ps" (about 394 horsepower) from its BMW-source 3.0-liter straight-six. Along with that will come a lighter, stiffer body, and a sportier suspension tune to manage and make the most of the 60-horse increase. Best Car says the next-generation Toyota 86 / Subaru BRZ will move to a new platform, without specifying whether it would be Toyota's TNGA platform suggested by a report in April — not that there are many other options. Neither the footprint nor the body dimensions are predicted to change, and transmissions will continue to include a six-speed manual and a six-speed automatic. The new platform will hold a new engine, although it won't be the revelation many fans want. The magazine says the Subaru 2.0-liter FA20 will retire, making way for the Subaru 2.4-liter FA24. The FA24 is the same engine in the Subaru Ascent crossover, where it produces 260 hp and 277 lb-ft. There'll be no such fireworks for the sporty twins due in the first half of 2021, output reported to be "improved to 220 ps," or 217 hp — a 12-hp bump over the current figure.

Mazda CX-5, Mazda6 and Mazda3 could stall due to software glitch

Mazda is recalling 262,220 vehicles due to a software error that could cause the engine to unexpectedly stall out. The recall affects 2018-2019 CX-5 crossovers, 2018-2019 Mazda6 sedans and 2019 Mazda3 models.  According to NHTSA recall No. 19V497000, which was filed June 27, a programming issue in the powertrain control module (PCM) on select Mazda vehicles could cause the engine to shut down. More specifically, "the software controlling the hydraulic valve clearance adjuster may operate improperly when transitioning from cylinder deactivation to full cylinder activation modes." This could potentially cause the intake valve rocker arm to come out of position and hit something else in the engine. If this occurs, the engine could misfire, the engine could lose power, and the Malfunction Indicator Light would be triggered. The recall affects 143,004 2018 CX-5s, 81,236 2019 CX-5s, 18,295 2018 Mazda6s, 2,551 2019 Mazda6s, and 17,134 Mazda3s. Some cars from those model years received the improved software at the factory and won't be affected by the recall. Although the first report of a related issue was chronicled in January 31, 2018, no injuries tied to the problems have been reported. Mazda is expected to start its recall on or before August 26, 2019, and will reprogram the PCM with improved hydraulic valve adjustment control programming for free. Contact Mazda at 1-800-222-5500, reference No. 3719F, for more information.

Britain's BBR already promising 2016 Mazda MX-5 Miata with 200+ horsepower

The 2016 Mazda MX-5 Miata is one of Autoblog's most anticipated cars to drive this year, and with good reason. Thanks to svelte, angular styling, the promise of less weight, the possibility of more power and all at a fairly affordable price, it represents pure, automotive enjoyment. Mazda is still not saying exactly how much power the new Miata's 2.0-liter Skyactiv four-cylinder engine will make, but that isn't keeping British tuner BBR from already working out how to squeeze even more ponies from the mill – potentially as much as 200 horsepower with natural aspiration. The company bought a Mazda3 for access to its 2.0-liter Skyactiv and went to work on it. "Our objective with the all-new MX-5 is to achieve the same 200 bhp output that we can easily enjoy with simple bolt-on components on the current 2.0-litre NC model, before building on further power upgrades using forced induction," said Neil McKay of BBR in the company's release. The 3's version of the engine is rated at 155 hp and 150 pound-feet of torque but is expected to be tuned for additional grunt for the droptop. Still, it gives BBR something to experiment with before the real thing is available. The tuner also got the opportunity to take a look at a pre-production 2016 Miata and is already developing "subtle bodywork alterations" for the upcoming convertible. You can get a taste for the company's plans with the rendering above. It sports tinted lights, a front lip spoiler, lower side sills and a tiny rear spoiler. Scroll down to read more about BBR's plans in the official announcement. BBR UNVEILS STUNNING 200 BHP ALL-NEW MAZDA MX-5 CONCEPT Despite deliveries not scheduled to begin until July, legendary Mazda performance tuner BBR is making great progress with both its visual concept and powertrain development for the all-new MX-5. "A program of detailed performance enhancements has already commenced at our Brackley base," says BBR's Neil Mckay, "thanks to our investment in a 2.0-litre Skyactiv powered Mazda 3. Our objective with the all-new MX-5 is to achieve the same 200 bhp output that we can easily enjoy with simple bolt-on components on the current 2.0-litre NC model, before building on further power upgrades using forced induction." Having viewed a pre-production version of the car BBR is also working hard on visual enhancements to add more presence to the svelte lines of the all-new MX-5.