2011 Mazda Mazda6 on 2040-cars

Auto blog

Mazda RX-9 could be a 400-hp, 2,900-pound coupe due in 2019

Mazda poured fuel on the white-hot rumors of an RX-8 successor with the RX-Vision earlier this year. The long, low rotary-powered coupe was lovely, but as we reported, it wasn't going to happen. But now, there's another chapter in the RX rumormill, and like overnight parts, it's from Japan. Japanese site Holiday Auto claims that Mazda will debut the so-called RX-9 at the 2019 Tokyo Motor Show. But before that happens, the Zoom-Zoom company will preview the production model with a concept at next year's Tokyo Motor Show. 2017 is important, marking 50 years since Felix Wankel had the screwy idea for his eponymous engine and 40 years after the company's first rotary powered car, the Cosmo, hit the market. Exciting as Holiday Auto's report is, the stats on this long-rumored car are better – via Google Translate, the Japanese site claims the RX-9 will use a 1.6-liter, two-rotor Wankel with a single turbocharger. It's good for around 400 horsepower. Holiday Auto isn't exaggerating when it claims the car could have "bike-like acceleration." As with other Mazda products, a low curb weight is key, which is why engineers are targeting a meager 1,300 kilograms (2,866 pounds) for the production model – that weight should be pretty evenly split, too, thanks to a rear transaxle. So yes, the RX-9 will be stupid fast and extremely agile. But it will come at a cost. And by cost, we mean that the RX-9 will start just south of eight million yen. That's $79,641 at today's rates, or enough to purchase about 2.5 RX-8 R3s, the hardcore handling trim of Mazda's last-gen rotary car. And if Mazda follows Nissan's GT-R pricing model, we'll see a six-figure RX-9 by 2025. When it comes to Mazda rotary rumors, grains of salt are a must. That's doubly true when we're talking about a possible concept that won't debut for over a year. But with the RX-Vision, Mazda showed that it hasn't abandoned rotary power, and with 2017 marking a big anniversary for the technology, it seems unlikely that the company will let the date pass without some acknowledgement. A concept car seems like a solid bet. Related Video:

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.

Patent application suggests Mazda rotary return

A recent patent application by Mazda reveals that the Japanese automaker is still working on the rotary engine. This could in fact be the Skyactiv-R engine found in the RX-Vision concept from the 2015 Tokyo Motor Show. As with anything Wankel-related, nothing is certain until Mazda makes a production commitment. But this filing suggests that serious development is happening in Hiroshima. The 2011 Mazda RX-8 was the last rotary-powered car you could buy in America. Slow sales, poor fuel economy, and tighter emissions standards prevented Mazda from committing to a follow-up. But the fundamental principles of the rotary - compact size and light weight - perfectly fit Mazda's Skyactiv ethos. (For an explanation of how rotaries work, click here.) In this new engine the intake port sits at the bottom of the engine with the exhaust port on top instead of the other way around. That allows for lower mounting, which improves a car's center of gravity. This rotary is also turbocharged. Putting the turbo up high helps ensure it doesn't get in the way of any body or chassis crossmembers. The implication of those claims is that somebody is thinking about how to put this engine in a car. There are other benefits as well. The short path from the exhaust port to the turbo ensures minimal turbo lag. It also allows for a close-mounted catalyst on top of the enigne, which will help emissions. Another innovation in this new engine is a triangle-shaped rotor that covers part of the exhaust port. This allows for different exhaust flow characteristics. The filing claims that that two of the four orientations allow for less airflow resistance in the exhaust port. As in previous Mazda rotaries, there are two spark plugs to manage ignition timing and combustion. But unlike in the 16X concept, Mazda's last public display of such an engine, the new rotary uses port fuel injection. Keep in mind this is only a patent application. A Mazda spokesperson refused to comment on future product, but commented "As we stated at the Tokyo motor show, Mazda is doing all that it can to bring a rotary to the market." In the meantime, keep your RX-7 prayer candles lit and hope for the return of the rotary before the end of the decade. You can bide your time by reading the entire application here. Related Video: Related Gallery Mazda RX-Vision Concept: Tokyo 2015 View 11 Photos News Source: USPTO via autoevolution Rumormill Mazda Performance rotary mazda rx7