2005 Mazda 6 I Sedan 4-door 2.3l on 2040-cars

Auto blog

Sorry, rotary fans, Mazda's RX Vision probably won't happen

Mazda is doing a lot of things the right way in this age of beige-ness. It just crammed a turbocharged inline-four into the improved CX-9, a bold move unto itself, and one that should also be heartening for Mazdaspeed fans. Wouldn't that engine make for a swell Mazdaspeed3 or Mazdaspeed6? There's a reasonable ray of hope there, but not necessarily a guarantee. The RX Vision, though, is a pipe dream. Mazda is smart to keep the rotary dream alive. It's smart to keep developing it in back rooms and to keep the idea on the public's mind. Credit where credit's due: Mazda has solved some of the stickiest issues the rotary engine has, through savvy engineering and perseverance. We've seen promising patent filings for the Skyactiv-R engine, which is supposed to be found in the RX Vision concept. Mazda uses every opportunity to remind us that development is continuing and that the company would love to bring a rotary-powered sportscar to production. I believe it. But the RX Vision is just a design study. And there are some harsh realities about rotary engine emissions and fuel economy standards that are difficult for modern piston engines to achieve without expensive componentry. Emissions and fuel economy are both bugbears of the rotary, in case you've forgotten. And that explains Mazda's interest in running rotaries on hydrogen, but down that road lie infrastructure challenges as daunting as making a gasoline-powered rotary burn as clean as one of Mazda's Skyactiv piston engines. All this is meant to put Mazda's recent comments to Top Gear in context. Mazda's design director, Kevin Rice, spoke to TG at the Concorso d'Eleganza Villa D'Este, and was waving Mazda's rotary flag quite enthusiastically. "In the back rooms at Mazda, we're still developing it," Rice said, "and when the world's ready to buy another rotary, we'll be ready to provide it." I'd like that to be a comforting statement, but given the realities of fuel economy and emissions regulations and Mazda's position in the market, it seems like a hollow platitude. "When the world's ready" is just another way of saying "when we solve the fundamental issues with this engine layout, and there's an unambiguous market study that shows we can build these cars and make a profit, we'll consider it." That seems like a lot of "ifs". Perhaps Mazda does have a clean-burning, efficient, cheap-to-produce rotary running on an engine dyno in Hiroshima, and it's prepping an RX-9 for the next auto show.

Mazda recalls 109k Tribute models for rust issue

The Mazda Tribute is being hit with a similar recall as its platform-mate the Ford Escape underwent a few weeks ago. Mazda is recalling 109,000 Tributes from model years 2001 to 2004. On the trucks, the subframe can rust from road salt, potentially causing the lower control arm to detach. If this happens, a loss of steering control could occur.
Mazda is adding a reinforcement crossbrace for added strength on the affected models. The recall covers Tributes currently registered in or originally sold in 20 northern states and Washington, DC, where road salt is used.
The reinforcement braces aren't available yet to do the repair. Mazda will send a letter in May to owners of affected vehicles that will inform them of the problem, and a second letter telling them when the parts will be ready. Scroll down to read the full recall press release.

Mazda recalling 190,000 CX-7s due to rusty ball joints

UPDATE: This post has been updated with additional information from Mazda. The Basics: Mazda is recalling 190,102 Mazda CX-7 crossovers built between February 14, 2006, to May 9, 2012 – model years 2007 through 2012. The Problem: Water can sneak in between the suspension ball joint fittings. If snow and road salt are common in your neck of the woods, the joints can corrode and separate from the lower control arms. That's bad if you enjoy steering your CX-7. According to Mazda, owners of affected models may notice a rattle from the front suspension due to the loose ball joint in the lower control arm fitting. Mazda describes separation of the ball joint and control arm as a "worst case" scenario "after extended operation in such condition." Injuries/Deaths: It's unknown if the rusting issue has led to any crashes, injuries, or deaths. Autoblog has a call into Mazda for additional details and will update this post with any new information. There have been no reports of accidents, injuries, or fatalities related to this recall. The Fix: Owners should report to their local Mazda service center, where techs will replace the both front lower control arms. Any work done is free of charge. If you own one: Mazda will perform some automotive triage with this recall, focusing on CX-7s that have had the longest exposure to salt and are most likely to suffer control arm separation first. Owners of 2007s and 2008s come first, followed by 2009 through 2011 models. Mazda will also focus on vehicles registered in states where snow and road salt are most common – Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, D.C. If you live in a more temperate region or own a 2012 CX-7, Mazda will perform recall work as "parts are available." Owners can contact Mazda customer service at 1-800-222-5500 for additional info. Recall notices should hit the mail around October 10th. Related Video: Featured Gallery 2011 Mazda CX-7: Review View 21 Photos News Source: NHTSAImage Credit: Copyright 2016 AOL Recalls Mazda Crossover mazda cx-7