I Touring Manual 2.0l Cd Front Wheel Drive Power Steering 4-wheel Disc Brakes on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Mazda2 sedan debuting in Thailand this month?

Mazda is reportedly set to introduce a Mazda2 with a four-door sedan body. Unlike the upcoming CX-3, which is debuting at the upcoming Los Angeles Auto Show and is almost certain to be sold in North America, this other version's chance here are a bit more mysterious.
According to The Bangkok Post, the Mazda2 sedan will make its word debut at the Thailand International Motor Expo on November 28, and the traditional five-door hatch will be there as well. Both body styles will be built in Thailand with diesel engines and will be the first vehicles to adhere to the country's eco-car rules for oil-burners with a SkyActiv 1.5-liter diesel that will make 105 horsepower.
At this time, there's no indication whether the new sedan might also be sold in the US, but we're not holding our breath - remember, the previous Mazda2 sedan never made it Stateside, either.

2016 Mazda CX-3 First Drive

If there's any doubt in your mind about the importance of B-segment crossovers, consider this: our review of the 2016 Mazda CX-3 arrives on your screen less than 24 hours after our first test of the 2016 Honda HR-V. Both of these vehicles are hugely important entries for their respective automakers. And while they take a similar shape and will compete head to head, the truth is, they're very different products. The HR-V is a knockout because of its excellent packaging and added versatility over Honda's own Fit and Civic. It's a wholly competent product, and we imagine it'll be one of, if not the best-selling vehicle in the class. In terms of being desirable for customers, it checks all the necessary boxes: frugal, functional, efficient, and affordable. Mazda takes a similar approach, but focuses instead on its key strength of offering cars that are great to drive, and look damn good. What's more, the CX-3 won't have to share showroom space as the HR-V does with the Fit – the all-new Mazda2 isn't slated for the US right now. Instead, the new CUV will serve as an entry point into the brand. Because of this, Mazda is betting big on the CX-3. That all starts with a product that's appealing to the eye. Design director Derek Jenkins says Mazda "didn't want to do the funky route" with its compact CUV – a nudge to the Nissan Juke and Fiat 500X, right there. Instead, the CX-3 uses the Kodo design language that Mazda has perfected since its production debut on the CX-5 in 2012. Across the board, the company's products look incredible, and the CX-3 is right at home amongst Mazda's latest beauties. Notice the long hood with a flowing character line that runs over the front fender and down the body side, chiseled off at the end with tight rear proportions and a small overhang. Huge arches draw focus to the premium 18-inch wheels found on our Grand Touring CX-3, but swallow up the 16-inch rollers used on lesser models. The glass area is kept to a minimum, but visibility from inside is still quite good. Details like the LED accents in the head- and taillamps look premium and aggressive. From all angles, this is an attractive crossover. It's a bold, dynamic entry in a class filled with cutesy, oddball, and bland designs. Underneath the CX-3 is the Skyactiv chassis found in the new Mazda2. At 168.3 inches long, 69.6 inches wide, and 60.7 inches tall, the CX-3 is smaller than the Mazda3 in every dimension except height.