2018 Mazda Mazda3 Touring on 2040-cars

Auto blog

Mazda G-Vectoring Control makes driving better without you knowing

Mazda has just spent eight years developing a new technology that will make its new cars a lot more fun to drive, even if you have absolutely no idea that it's working. And subtlety's the point, Mazda engineers told us at a press event at Mazda Raceway Laguna Seca. In fact, the effects of what they've dubbed G-Vectoring Control are so fine that the marketing and PR teams are at a loss for how to do their jobs with it. "The engineers have done their work," said Mazda Director of Communications Jeremy Barnes, "But how do we get the message across?" The basic premise is this: G-Vectoring activates only when the car's on-board computer reads simultaneous steering and throttle input. The data — including throttle position, steering angle, and, crucially, how quickly you're adjusting the steering angle — are then funneled through an algorithm to reduce engine torque, which transfers vehicle weight, adding more grip to the wheels that need it. The system will appear first on 2017 Mazda6 sedans arriving in showrooms later this year, followed by the 2017 Mazda3. Actually, "subtle" does not even begin to describe the effect. G-Vectoring Control can detect as much as one tenth of one degree of steering angle, and changes the cornering forces only 0.1 to 0.5 g as a result. "That's less than the human body can feel," explained Vehicle Development Engineer Dave Coleman. In practice, G-Vectoring reduces the steering angle at turn-in, as well as the rate at which one turns the wheel. To demonstrate, Director of R&D Kelvin Hiraishi rode shotgun with us in a specially equipped Mazda6 that allowed him to turn G-Vectoring on or off at the push of a button (production cars will always have it on). Hiraishi had us drive a number of courses, including Mazda Raceway Laguna Seca itself, while an engineer measured our steering inputs with a laptop Matrix'd into the car's electronic brain. I drove the same course several times with the same car in the same conditions, with cruise control locked and the system turned on or off. Lo and behold, with G-Vectoring activated, the engineer's output graph showed that my steering inputs were indeed reduced ever so slightly. There were two times that G-Vectoring was markedly noticeable. The first on a turn with a minor banking toward the outside, and the second was during cornering over an artificially wet section of the course — in other words, when the car was at the limits of adhesion.

Honda, Nissan and Mazda recalling 3 million vehicles for airbag inflators

Three million more vehicles can be added to the worldwide tally to be repaired for the faulty airbag inflators supplied by Takata. Honda, Nissan, and Mazda have all issued recalls to replace the bad part, including about 1.2 million of them in North America. NHTSA has been investigating all three companies, plus Chrysler and Toyota, for potentially affected vehicles.
Honda is recalling roughly 1.02 million Civic, CR-V, Odyssey and Element models In North America, built between April 2000 and October 2002. Mazda needs to repair 14,794 units of the RX-8 and Mazda6, and Nissan has 228,000 vehicles in North America to be fixed.
Chrysler is also starting what it calls a "regional field action" to replace the inflators in the 2006 Dodge Charger, according to a company spokesperson. The company says that it has not yet found the problem in any of its vehicles, but it's being done "out of an abundance of caution." The final number of Chargers affected will be announced later this week.

Huet Brothers working on new Miata-based retro coupe

Does the name Huet ring a bell? The Dutch brothers started out doing classic car tours in Europe before they started designed and building their own retro sports cars. The first was called the Huet Brothers Special. It was based on an old Triumph TR6 and surfaced back in 2009. But a few years later they started showing designs for a new coupe that called for a straight-six engine under a long bonnet with a fastback roofline, and started taking orders. Over the past two and a half years we didn't see anything materialize out of the Huet Brothers' plans, but word out of the Netherlands has it that the design is back on the table.
According to the Autovisie section of Dutch newspaper De Telegraaf, Tino and Paul Huet were planning on building their coupe on the base of the MX-5 Miata. But now that Mazda is preparing to launch an all-new model, the Huets have decided to wait until next year and build their dream car on the new Skyactiv roadster chassis.
Rather than trying to shoehorn in a bigger engine (or the subsequent diesel model that was set to follow), the Huets are reportedly prepared to stick with Mazda's four-pot, offering it in stock form and various states of upgraded tune.