2014 Mazda Mazda3 I Sport on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

2016 Mazda MX-5 Miata will rock 2.0L SkyActiv engine in US, 1.5L elsewhere

Let the speculation finally end - we know what will power the next-generation 2016 Mazda MX-5 Miata, and it's not turbocharged. The US model will get a SkyActiv 2.0-liter engine and six-speed manual, while models in the rest of the world have a 1.5-liter engine, confirming earlier rumors.
Unfortunately, Mazda isn't letting loose how much power either of these mills make just yet. For sake of comparison, the current SkyActiv 2.0 in the Mazda3 produces 155 horsepower and 150 pound-feet of torque, and the 1.5-liter in the UK (and elsewhere) has about 99 hp and 110 lb-ft of twist. However, the current Miata produces 167 hp and 140 lb-ft.
But fret not droptop fans. The company's brochure from the 2014 Paris Motor Show confirms, "all available drivetrains have been specially tuned for the all-new MX-5," which at least hints at the possibility of more performance. Also, even if the numbers remain untouched, the new Miata should feel even more sporting on the open road. That's because Mazda says the new model weighs in the neighborhood of 2,200 pounds; with that in mind, the 2016 car would boast around 14.19 pounds per horsepower versus 14.85 lb/hp in the present MX-5. Progress!

Mazda2 production fires up in Mexico

Mazda has officially kicked off production of the next-generation Mazda2 at the company's new factory in Salamanca, Mexico. Alongside the auto assembly plant, operations have also commenced at the facility's engine machining factory.
"With the start of production of the all-new Mazda2, operations underway at the engine machining plant, and an increase in our annual production capacity, we now have an even stronger production framework capable of supplying global markets with Skyactiv products of the same high quality level as those made in Japan," Mazda de Mexico Vehicle Operation's President Keishi Egawa said in a statement. "At the same time, we are pleased to be able to make a contribution to Mexico's further economic growth."
MMVO joins Mazda's Hofu Plant in Japan and the Auto Alliance factory in Thailand, which commenced Mazda2 production in July and September, respectively.