2012 Mazda Mazda3 I Touring on 2040-cars

Auto blog

'Ringbanana' Miata is improbable 9-minute Nurburgring car

The combination of being inexpensive, capable, reliable, and friendly to all skill levels makes the Mazda Miata one of the world's most popular platforms for motorsports, but the roadsters aren't exactly rocketships. What would it take to lap a ratty, first-gen example around the Nurburgring Nordschleife in less than nine minutes? We're not exactly sure, but the Ringbanana team intends to discover the answer. The project is the type of thing that gets dreamed up after a few too many pilsners: buy the cheapest running Miata available and put as little money necessary into the roadster to make it capable around the 'Ring. As the Best-Motoring-inspired intro explains, the Mazda is largely stock other than some Fulda performance tires, possibly aftermarket springs, and a stripped interior. The video above shows the baseline test, and the convertible manages a 9:21.8 circuit, which doesn't seem too bad as a start. The video below goes into far more detail about the project's genesis and its goal. Plus, the two hosts are quite entertaining when replying to the comments from the original clip. We wish them the best of luck and look forward to following along on Facebook to see what it takes to get the Ringbanana below nine minutes. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2016 Mazda MX-5 Miata first in-car observations

We've had few days to digest the all-new 2016 Mazda MX-5 Miata since the roadster was first revealed on Wednesday evening when we offered you our first impressions. Since that time, we've gone back and looked at the car a number of times in person here in California, and we've even seen it briefly run under its own power (okay, it was more of a saunter). What we didn't get the chance to do at the reveal, however, was sit inside the car. We've since been able to remedy that, and while we haven't been allowed to drive the new roadster, we do have some initial in-car impressions to share with you.
First, the location and feel of the major controls is quite excellent. The three-spoke steering wheel is an MX-5 specific item - it's not shared with any other Mazda. That's vital, because others would likely be too big in diameter or have the wrong rim thickness. The wheel's redundant controls seem to be well laid out and the airbag boss is very small. The column tilts, but unfortunately and somewhat inexplicably, it still doesn't telescope.
Pedals are well-spaced, and the six-speed manual has the same short throws and positive engagement that we've come to know and love.

Flyin' Miata is building a V8-powered MX-5 ND

It's cold in many parts of the country, but this V8-swapped 2016 Mazda MX-5 Miata that Flyin' Miata is developing has us dreaming about throwing on a parka and taking a very brisk drive. This beast is the product of the talented folks at Flyin' Miata, but we can't get too excited just yet. According to the company's brief Facebook post, this is just a dummy V8, placed under the Miata's hood to confirm fit. Judging by the photo, the engine fits like a glove. "There's still a long way to go before this is a real thing," Flyin' Miata writes, but the company admits everything looks "very promising" so far. The post doesn't mention any details about the estimated specs, but Autoblog reached out to Flyin' Miata for more information about this intriguing build. Keith Tanner, one of the mad scientists who shoehorns V8s into Miatas at the Colorado outfit, told us that Flyin' Miata is looking at both the LS3, which will provide between 430 and 525 hp, and the LT1 which is 460 hp out of the box. A supercharged LT4 is also being considered, but as Tanner put it, "that might be a little nuts" in a car as light as the ND. In any of these engine configurations, Tanner estimates the V8-swapped ND should comfortably be a sub-4 second to 60 mph car. The transmission will be a Tremec T56 Magnum six-speed manual. The suspension, brakes, fuel system, cooling system, and the chassis itself will all be beefed up to handle the power, as per normal FM practice. The one question mark is the rear end, as the ND's existing one simply won't be up to the task of putting that much horsepower to the ground. The 2016 Miata was one of the best cars we drove in 2015, but Flyin' Miata knows how to turn a standard MX-5 into an absolute hotrod with the company's LS3 V8 conversions for earlier models. Imagining the more modern chassis from the latest generation with a massive dollop of more power is an exciting thought. We can't wait to see how this project turns out. Related Video: