2011 Mazda Mazda3 I Touring on 2040-cars

Auto blog

Mazda recalls 1.37 million older vehicles for ignition switch short [UPDATE]

UPDATE: Mazda has confirmed to Autoblog that NHTSA's figures and list of effected models are accurate. Mazda is recalling 1,368,500 older vehicles in the US that date as far back as the late '80s because a potential short circuit in the ignition switch could cause a fire. According to the National Highway Traffic Safety Administration, the models include: 1990-1995 323 1993-1998 626 1993-1995 929 1989-1998 MPV 1993-1997 MX-6 1992-1993 MX-3 1990-1998 Protege Mazda reports that over time the grease around the switch's contact points can carbonize and become conductive, which can eventually lead to a short circuit. In some cases this results in smoke, but it could also lead to a fire. According to company spokesperson Tamara Mlynarczyk to Autoblog, there're no accidents, injuries, or fires in the US. Once the vehicle is running, the potential fault also doesn't affect drivability. Documents from NHTSA (as a PDF), indicate there was a fire in one of these vehicles in Japan in 2002 that could have been linked to this issue. The recall should begin in December. In its announcement of the issue below, Mazda reports 1.2 million vehicles affected and includes the 1990-1996 323/Protege. Autoblog has reached out to the company to understand the discrepancy. Related Video: RECALL Subject : Ignition Switch may Overheat Report Receipt Date: OCT 19, 2015 NHTSA Campaign Number: 15V674000 Component(s): ELECTRICAL SYSTEM Potential Number of Units Affected: 1,368,500 All Products Associated with this Recall Vehicle Make Model Model Year(s) MAZDA 323 1990-1995 MAZDA 626 1993-1998 MAZDA 929 1993-1995 MAZDA MPV 1989-1998 MAZDA MX-6 1993-1997 MAZDA MX3 1992-1993 MAZDA PROTEGE 1990-1998 Details Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat. CONSEQUENCE: If the ignition switch overheats there would be an increased risk of a fire. REMEDY: Mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall is expected to begin December 15, 2015. Owners may contact Mazda Customer Experience Center at 1-800-222-5500, option#6. Mazda's number for this recall is 8715J.

Mazda 16X rotary engine two years away, will arrive in all-new model

We last reported on Mazda's next-generation rotary engine project in June of 2012 when the automaker built its last Renesis-powered RX-8, but rumors of this new engine's development had been around way before that final car left the production line in Japan, last year.
We now have enthusiastic confirmation that this next-gen rotary engine is really and truly going forward. It is still referred to as 16X and has several priorities. First is to lower fuel consumption compared to the RX-8's engine, while still making gains in terms of performance. The second is to reduce the burning of oil that was happening at the highest revs. And the third and final priority, and perhaps most key for enthusiasts, is to give the powertrain a big torque upgrade.
What we were told by a Mazda USA insider (while we are all here together at the festivities in Monterey) is that the first application of the new 16X engine will be happening in two years' time in an as yet undisclosed new model. Oh, the mind races to our eternal Mazda wish list...

Mazda's new turbo four fits in both the 6 and the 3

Despite the size differences, the Mazda CX-9 shares a lot with its smaller car-based siblings, the Mazda6 and Mazda3. That could allow Mazda to slot its full-sizer's new 2.5-liter, turbocharged four-cylinder engine under the hood of its smaller offerings. Pardon us while we do a happy dance. "[The 2.5-liter turbo] fits in a lot of our cars, and where we're actually going to put it is another question," Mazda North America vehicle development engineer Dave Coleman told Australia's Car Advice. Coleman specified that the turbocharged engine will fit in all the same applications that can accommodate the company's 2.5-liter gas and diesel engines. "Basically, that big space we used for the bundle of snakes exhaust manifold, the turbo is in that space too. They're all packaged to occupy the same space. It's exactly the same clearance as the exhaust manifold of the other engines." This kind of logic – if Engine A is the same size as Engine B, then both should fit in Car C – is what's lead us to imagine a turbocharged Mazda6 since the new engine was announced. In short, it's great news. Mazda's 2.5-liter turbo is a hell of an engine in the CX-9, and it's hard to imagine it'd be worse in a lighter vehicle. But just because it works from an engineering standpoint doesn't mean it's going to happen. At least, not soon. "It fits. I'm not a product planner so I don't get to make that call," Coleman told Car Advice. "It's up to the product planners to decide what they're going to put it in." The most obvious application for a turbocharged engine in the 3 or 6 is as a reborn Mazdaspeed model. But don't get too excited – Coleman said Mazda hasn't even gotten as far as building an engineering prototype with this engine. We're still firmly at the theoretical stage. And that's bad news, because it gels with what we've been reporting – that Mazda will wait a generation for future Mazdaspeed models. We just stopped doing our happy dance. Related Video: