2011 Mazda 3 S Sedan 4-door 2.5l on 2040-cars

Auto blog

2017 Mazda CX-9 Prototype First Drive

If you read our coverage from last week's Los Angeles Auto Show, you'll note that we were extremely fond of the new Mazda CX-9. We like the look of the thing, inside and out, and it promises to be the best-driving entry in the three-row crossover class. We agree wholeheartedly with that claim. You see, we already drove it. Full disclosure: Our test of the camouflaged CX-9 prototype you see here was short, and while we were able to get a good handle on the CX-9's basic driving dynamics, it'll take more than a 30-mile session around the outskirts of LA to uncover the finer details. What's more, these vehicles are not production ready. In fact, according to our handlers at Mazda, the CUV we tested was actually at the stage before pre-production – so basically, a pre-pre-production car. That said, all the details about the engine, transmission, suspension, and steering are "largely final." As you can see in the gallery, the cars we tested were heavily camouflaged both inside and out. As for styling, we love it – see the undisguised pictures from the LA show for more views. And as for inside, we can say leather seats of our Grand Touring model were comfortable and supportive, and the smallish steering wheel felt natural in the hand. Even in pre-pre-production state, the CX-9 was impressively quiet. An extra 53 pounds of under-floor sound deadening, thicker windows, and active noise cancellation all contribute to what Mazda claims will be "among the quietest vehicles in its class." It's worth noting that the good sounds, like the throaty, whooshy noises of the turbocharged engine, found their way into the cabin just fine. The 2.5-liter, turbocharged four-cylinder engine – Mazda's first force-induced Skyactiv engine – is an excellent piece. The 2.5-liter, turbocharged four-cylinder engine – Mazda's first force-induced Skyactiv engine – is an excellent piece. It uses a variable geometry turbocharger, which the company calls a Dynamic Pressure Turbo. Here's how Mazda explains it: Imagine a normal garden hose. Put your thumb over the nozzle, and the force of the water increases dramatically. That's the DPT at low rpms. It features three small exhaust ports to direct exhaust gases into the turbo, making for 17.4 quick-spooling PSI at low rpms. As the revs climb, a flow control valve opens up, redirecting the gases to a trio of larger ports – removing your thumb from the hose, if you will – and keeping the boost up.

Fiat 124 Abarth Spider spied, may get Alfa 4C power

We've long been excited to see, hear, and drive the car that results from the in-process Fiat-Mazda partnership. The Italian brand has had access to the excellent 2016 Mazda MX-5 Miata on which to base its own roadster, and the fruits of that labor will soon ripen. Spied here is not only the ensuing Fiat 124, but a hotter Abarth tuned version of the spider. At least, that's what we're hoping. Our spy shooters indicated that the car seen here not only sounded more aggressive than 'standard' 124 mules seen previously, but that it also accelerated away from their long lenses with a smartness. The 124 Spider is already rumored to make use of the 1.4-liter turbo I4 that makes 160 horsepower in the Fiat 500 Abarth, and this version may have a still-more-powerful engine. Another tell about the added output are the quad tailpipes in place of the lesser car's set of two. There's no hard evidence to support exactly which engine might be under the 124's hood, however. It's possible that the 1.7-liter turbo from Alfa Romeo 4C could be in play – with its 237-hp output – as the 124 was originally going to wear an Alfa badge. If that were to happen, however, the Fiat would almost certainly get a dual-clutch transmission instead of the purer manual box. In any event, more details about the car will no doubt crop up closer to the expected reveal this fall. Related Video:

Toyota, Honda, Mazda and Nissan recall 3.4 million vehicles for faulty airbags

Most vehicle recalls that take place these days are a result of some problem that happens during the manufacturing process by the automaker, but as we see here, parts suppliers can also factor in to problematic safety issues. Automotive News is reporting that a total of 3.4 million vehicles produced by Japanese automakers between 2000 and 2004 are being recalled globally due to faulty airbags produced by an outside supplier, Takata Corp.
According to the report, vehicles from Toyota, Honda, Nissan and Mazda are being recalled because of passenger front airbags that do not inflate properly. Globally, Toyota is said to be recalling around 1.73 million cars including 510,000 in the US composed of Toyota Corolla, Matrix, Sequoia and Tundra as well as the Lexus SC430 for the 2001 through 2003 model years; this is the second time this year the 2003 Corolla and Matrix have been recalled for an airbag problem. Honda is recalling 1.14 million models, Nissan another 480,000 and Mazda 45,463. The article says that Takata supplied faulty airbags to non-Japanese automakers, but it did not specify which ones.
Honda and Toyota have released information on their own websites about the recall, while Nissan and Mazda have not yet commented. Read official press releases from Honda and Toyota, below, and look for updates as we have word from the others.