Convertible Miata Mx5 Grand Touring, 6 Disc Bose Sound, Leather on 2040-cars

Auto blog

2016 Mazda MX-5 Miata first in-car observations

We've had few days to digest the all-new 2016 Mazda MX-5 Miata since the roadster was first revealed on Wednesday evening when we offered you our first impressions. Since that time, we've gone back and looked at the car a number of times in person here in California, and we've even seen it briefly run under its own power (okay, it was more of a saunter). What we didn't get the chance to do at the reveal, however, was sit inside the car. We've since been able to remedy that, and while we haven't been allowed to drive the new roadster, we do have some initial in-car impressions to share with you.
First, the location and feel of the major controls is quite excellent. The three-spoke steering wheel is an MX-5 specific item - it's not shared with any other Mazda. That's vital, because others would likely be too big in diameter or have the wrong rim thickness. The wheel's redundant controls seem to be well laid out and the airbag boss is very small. The column tilts, but unfortunately and somewhat inexplicably, it still doesn't telescope.
Pedals are well-spaced, and the six-speed manual has the same short throws and positive engagement that we've come to know and love.

Mazda specs new MX-5 Miata with accessories

It's been 26 years since Mazda showcased the original Miata at the Chicago Auto Show, and now it's returned with a conceptual take on the new model, decked out with all the accessories and optional equipment your roadster-loving heart could desire. Or at least some of 'em, anyway. This show car is painted Ceramic Metallic (Zoom Zoom-speak for "white") and spec'd out with a full aero kit (including front air dam, side sills, rear skirt and lip spoiler) all done up in gloss black, 17-inch BBS wheels and Brembo brakes with red calipers. Mazda is also showcasing a carbon-fiber luggage rack for the new MX-5 that weighs less than two pounds and includes and integrated brake light. "The concept parts and accessories we have showcased at the Chicago Auto Show," said Mazda's North American chief Jim O'Sullivan, "were developed to give customers a look at what is possible for the new cars to make them truly one-of-a-kind, adding to that excitement." See them shown off in our high-res gallery of live photos, above. MAZDA UNVEILS 2016 MX-5 MIATA ACCESSORIES CONCEPT DESIGN AT CHICAGO AUTO SHOW CHICAGO, Feb. 12, 2015 -- The only thing better than the all-new 2016 Mazda MX-5 Miata is a personalized 2016 Mazda MX-5 Miata. Today at the Chicago Auto Show, where the first-generation MX-5 Miata was introduced to the world in 1989, Mazda revealed an MX-5 accessories design concept of the next-generation roadster that will hit showrooms this summer. At the Chicago Auto Show, Mazda revealed a 2016 Mazda MX-5 Miata accessories design concept for the next-generation roadster that will hit showrooms this summer. "There is so much MX-5 history at the Chicago Auto Show, and we wanted to continue building on that," said Jim O'Sullivan, president and CEO, Mazda North American Operations. "The MX-5 is the soul of our company, and its enthusiast following both inside and outside of Mazda drives us to keep innovating new ideas for it and the rest of our lineup." Painted Ceramic Metallic, the 2016 MX-5 accessories concept will be on display from Thursday, February 12 through Sunday, February 22 and includes an Aero Kit, BBS Wheels and Brembo Brakes as well as a Luggage Rack shown separately in Mazda's display. MX-5 concept accessories include: - Aero Kit (Front Air Dam, Side Sill Extensions, Rear Bumper Skirt and Rear Lip Spoiler): The gloss-black Aero Kit is the same package found on the 2016 MX-5 Global Cup Car that debuted at SEMA in November.

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.