2007 Sport Used 2l I4 16v Manual Rwd Convertible Premium on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Mazda recalling 18k Mazda6 and RX-8 models over airbag inflators

Faulty Takata airbag inflators keep taking their toll on automakers. Mazda is the latest to be affected in the US by announcing a recall covering 18,050 Mazda6 and RX-8 models to replace the front, passenger-side airbags. Specifically, the campaign covers 18,000 Mazda6 units from the 2003 and 2004 model years built between May 29, 2002, and March 4, 2004, and 50 RX-8 vehicles from the 2004 model year made between June 25, 2003, and June 30, 2003.
As with the rest of the vehicles with these faulty inflators, it's possible for the part to rupture when deploying the airbag and potentially spray shrapnel at the occupant. Mazda's defect notice goes into a bit more detail than most about the problem saying: "some propellant wafers have been produced with an inadequate compaction force, or may have been exposed to uncontrolled moisture conditions (those wafers could have absorbed moisture beyond the allowable limits)."
This isn't Mazda's first difficulty with Takata-supplied airbags this year. The company was among the seven automakers that recalled vehicles in hot-weather states over the inflators. It also had to recently fix 42,000 Mazda6 vehicles in China over the issue.

2016 Scion iA shows its face, for better or worse, in New York [w/video]

We have a theory that, among auto designers, there's something resembling Stockholm Syndrome. Designers spend so many hours looking at a single product that, after awhile, they can't help but fall in love with it, regardless of how bad it may look to everyone else. That might explain the appearance of the Scion iA, which while largely similar to the handsome Mazda2, replaces that car's attractive five-pointed grille with what could be described as a gaping maw. Fortunately, it's only the Scion grille that really causes any offense. The parts of the iA that have been left to Mazda designers are, as we said, rather handsome. That includes both the attractive rear and the Kodo-derived lines found in the tiny sedan's profile. The cabin, meanwhile, is well outfitted with standard equipment, including a seven-inch touchscreen display. Plastic is the dominant material, although the overall layout is logical and mostly attractive. Have a look at our live gallery of images of Scion's first-ever four-door sedan. Sports Sedan that Shouts Success All-New 2016 Scion iA Rolls Into New York With a Trunk - Brand's first-ever sedan with dramatically sporty look and agile moves - Estimated MSRP in the $16,000-range for well-equipped mono-spec model • High-spirited 1.5-liter engine; estimated 42 MPG highway - Choice of 6-speed stick shift or 6-speed automatic - Standard Low-speed Pre-collision safety system - Roomy cabin with premium amenities - 7-inch multimedia system with voice recognition NEW YORK, March 31, 2015 – Scion is expanding its line-up in more ways than one. In addition to adding a new vehicle to its stable, it's also adding its first-ever sedan, the remarkably sporty, yet very affordable, 2016 Scion iA. The Scion iA sedan joins the all-new 2016 Scion iM hatchback for a one-two punch in the subcompact and compact segments. The new sans-hatch Scion will arrive in dealerships this fall for an estimated MSRP in the $16,000-range. That's for a mono-spec model equipped with standard Low-speed Pre-collision safety system and 7-inch multi-media system with voice activation. Because Scion has a no hassle, no haggle Pure Price, customers walk out the door with the same price they saw posted in the dealership. "Dramatic" could be an understatement when describing the visual impact of the 2016 Scion iA. Beneath the daringly curved sheetmetal lies a tight, agile machine that re-defines "entry level." Call the design "class above," a term that applies throughout the car.