1997 Mazda Mx-5 Miata on 2040-cars

Auto blog

Next Mazda MX-5 Miata headed for 2015 Chicago debut

Twenty-six years after it was introduced at the 1989 Chicago Auto Show, the much anticipated fourth generation Mazda MX-5 Miata will meet the press at the 2015 Chicago show. A piece in Autocar refines some of the details on the larger, lighter Miata that a Mazda insider has said will be "our best-looking car ever."
The company has relented on the quest for the metric tonne, the 1000-kilogram (2,200-pound) target too difficult to achieve in light of cost constraints. You can still expect it to lose a generous dollop of weight - Autocar says a curb weight of 1,100 kg (2,420 pounds) will still make it the lightest in its class. And Mazda will be stressing a fun driving experience through light weight and a modest amount of naturally-aspirated horsepower. Engine capacities of 1.5 and 2.0 liters are expected. Sounds familiar (and good), right?
The Miata's interpretation of Kodo design will be veer from that found on the Mazda3 and Mazda6, with "very clean and simple" lines marking out "more muscular proportions" and elongated bodywork on a longer wheelbase. A stretched engine bay will make room for the current Skyactiv engine and perhaps the future Skyactiv 2 powerplants, initial reports suggesting there could be a 30-percent increase in fuel economy from the moment it arrives.

Mazda doubles down with a pair of Threes

Looking to appeal to the compact tuner crowd, Mazda brought two different flavors of its 2014 Mazda3 to the SEMA Show in Las Vegas this week. The Club Sport 3 Concept hatchback (above) has more of a racing vibe to it, while the Vector 3 Concept sedan (right) looks to inject a little extra fashion into the all-new Mazda3.
Hotting up the 3, Mazda stuck with the stock 2.5-liter engine on the Club Sport 3 Concept but added a limited-slip differential and six-speed manual gearbox, the latter of which was lifted from the CX-5 crossover. Other upgrades include coil-over shocks, a performance exhaust, Brembo brakes and an aero body kit - the latter of which will be offered to buyers at a later date.
While the Vector 3 Concept does get some performance bits like two-piece Brembo brake rotors and grippier tires, the focus on this sedan is all about styling. Starting with a custom paint job and ghost stripes, the whole look is tied together with 19-inch, V-spoke Rays wheels.

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.