1990 Mazda Miata Mx-5 Race Car Track Ready Crate Engine Ita Spec Wow!$$ on 2040-cars

Auto blog

Mazda zooms into SEMA 2016 with lighter MX-5 Speedster and RF Kuro concepts

It's almost time for the 2016 SEMA aftermarket show again, if you haven't guessed already by the steady parade of early looks at various show cars. Mazda's MX-5 creations are generally a highlight for us, unapologetic Miata junkies that we are. This year's cars should be just as exciting as last year's, one being a revision of last year's Speedster concept and the other based on the brand new, sexy RF retractable targa top model. Both SEMA MX-5s were designed and built in-house at Mazda's Irvine design studio. This year's Speedster is somehow even lighter than before. Mazda carved 100 pounds out of it, making it a staggering 350 pounds less than a production soft top model. It's also been repainted in a color called "White Ether", which we're imagining looks something like the "Blue Ether" paintjob on last year's highly reflective Speedster minus the blue tint. Mazda will probably never sell a roofless Miata or anything this lightweight, but maybe it should. It looks like it'd be a blast to drive at a road course. And then there's the RF Kuro concept, the first RF-based SEMA show car, which is shown in the teaser above. It doesn't seem terribly extreme, to be honest. It's wearing a matte charcoal paint, which explains the "Kuro" moniker – kuro means "charcoal" in Japanese. A set of 17-inch RAYS forged wheels and MX-5 Cup suspension, and that's about it. Not to knock it; the RF is a sexy looking thing as it sits, and Cup suspension should make it handle even more like a go-kart. Of course, both concepts will be fully revealed at the show next month in Las Vegas. Stay tuned for a dose of concept Miata hotness.Related Video:

2014 Mazda6 i Sport

In an automotive landscape dominated by platform sharing, technology exchange and any number of other cross-fertilization/cost-saving/amortization exercises, it's actually pretty rare that we get to drive a new car that is as "all-new" as this, the 2014 Mazda6. With brand-spanking new Skyactiv architecture throughout - engine, transmission, body and chassis all included - this 6 represents a new era of flexible production and cutting edge running gear for the happily lithe car company.
Our own Jonathon Ramsey did a cracking job of running the Mazda6 through its First Drive paces a few months ago, and sufficiently impressed upon us just how good looking a car this is for the midsize sedan segment. Suffice it to say, now, then, that this is easily the most interesting (and quite possibly the most beautiful) midsize sedan in the segment today. However, as Mr. Ramsey reviewed a fully contented example of the 6 - one equipped with the six-speed automatic transmission - we took advantage of Mazda's North American launch event of the car to suss out the base Mazda6 i Sport, complete with its six-speed Skyactiv manual gearbox. This may not shock you, but the stripper's pretty good, too.
Driving Notes

Mazda RX-9 could be a 400-hp, 2,900-pound coupe due in 2019

Mazda poured fuel on the white-hot rumors of an RX-8 successor with the RX-Vision earlier this year. The long, low rotary-powered coupe was lovely, but as we reported, it wasn't going to happen. But now, there's another chapter in the RX rumormill, and like overnight parts, it's from Japan. Japanese site Holiday Auto claims that Mazda will debut the so-called RX-9 at the 2019 Tokyo Motor Show. But before that happens, the Zoom-Zoom company will preview the production model with a concept at next year's Tokyo Motor Show. 2017 is important, marking 50 years since Felix Wankel had the screwy idea for his eponymous engine and 40 years after the company's first rotary powered car, the Cosmo, hit the market. Exciting as Holiday Auto's report is, the stats on this long-rumored car are better – via Google Translate, the Japanese site claims the RX-9 will use a 1.6-liter, two-rotor Wankel with a single turbocharger. It's good for around 400 horsepower. Holiday Auto isn't exaggerating when it claims the car could have "bike-like acceleration." As with other Mazda products, a low curb weight is key, which is why engineers are targeting a meager 1,300 kilograms (2,866 pounds) for the production model – that weight should be pretty evenly split, too, thanks to a rear transaxle. So yes, the RX-9 will be stupid fast and extremely agile. But it will come at a cost. And by cost, we mean that the RX-9 will start just south of eight million yen. That's $79,641 at today's rates, or enough to purchase about 2.5 RX-8 R3s, the hardcore handling trim of Mazda's last-gen rotary car. And if Mazda follows Nissan's GT-R pricing model, we'll see a six-figure RX-9 by 2025. When it comes to Mazda rotary rumors, grains of salt are a must. That's doubly true when we're talking about a possible concept that won't debut for over a year. But with the RX-Vision, Mazda showed that it hasn't abandoned rotary power, and with 2017 marking a big anniversary for the technology, it seems unlikely that the company will let the date pass without some acknowledgement. A concept car seems like a solid bet. Related Video: