05 Mazda Miata Mx-5 Leather Heated Convertable Cd on 2040-cars

Auto blog

Next Mazda CX-9 spied for first time

After plenty of rumors, we finally have our first look at the second-generation Mazda CX-9. Development of the crossover look to be very far along based on these of production bodies hidden under form-fitting camouflage. The overall aesthetic, based on what we can see here, is very much in keeping with Mazda's handsome Kodo design language. The CX-9 you see here looks pretty much like a Mazda3 scaled up about 279.3 percent, with a five-pointed grille and expressive headlights prefacing a sculpted, swooshy body. In back, there's an aggressively raked rear window that won't do any favors for cargo capacity, but makes for a handsome silhouette. And if previous Mazdas are any indication, we'd expect the CX-9 to feature a very handsome, high-quality cabin, although it's impossible to see in these images. According to our spy photographers, the new CX-9 will abide by Mazda's Skyactiv philosophy, which should make for both an entertaining an efficient three-row crossover. A 2.5-liter, turbocharged four-cylinder will be the engine of choice, replacing the antiquated V6 of the current model, and will be available with an all-wheel-drive system. While this engine is slated for the CX-9, enthusiasts should take note that this first Skyactiv turbo will likely form the basis of future Mazdaspeed efforts. As previously reported, the CX-9 will make its debut this November at the 2015 Los Angeles Auto Show as a 2017 model. Should any info pop up before then, expect to see it here.

Mazda 16X rotary engine two years away, will arrive in all-new model

We last reported on Mazda's next-generation rotary engine project in June of 2012 when the automaker built its last Renesis-powered RX-8, but rumors of this new engine's development had been around way before that final car left the production line in Japan, last year.
We now have enthusiastic confirmation that this next-gen rotary engine is really and truly going forward. It is still referred to as 16X and has several priorities. First is to lower fuel consumption compared to the RX-8's engine, while still making gains in terms of performance. The second is to reduce the burning of oil that was happening at the highest revs. And the third and final priority, and perhaps most key for enthusiasts, is to give the powertrain a big torque upgrade.
What we were told by a Mazda USA insider (while we are all here together at the festivities in Monterey) is that the first application of the new 16X engine will be happening in two years' time in an as yet undisclosed new model. Oh, the mind races to our eternal Mazda wish list...

Mazda recalling 18k Mazda6 and RX-8 models over airbag inflators

Faulty Takata airbag inflators keep taking their toll on automakers. Mazda is the latest to be affected in the US by announcing a recall covering 18,050 Mazda6 and RX-8 models to replace the front, passenger-side airbags. Specifically, the campaign covers 18,000 Mazda6 units from the 2003 and 2004 model years built between May 29, 2002, and March 4, 2004, and 50 RX-8 vehicles from the 2004 model year made between June 25, 2003, and June 30, 2003.
As with the rest of the vehicles with these faulty inflators, it's possible for the part to rupture when deploying the airbag and potentially spray shrapnel at the occupant. Mazda's defect notice goes into a bit more detail than most about the problem saying: "some propellant wafers have been produced with an inadequate compaction force, or may have been exposed to uncontrolled moisture conditions (those wafers could have absorbed moisture beyond the allowable limits)."
This isn't Mazda's first difficulty with Takata-supplied airbags this year. The company was among the seven automakers that recalled vehicles in hot-weather states over the inflators. It also had to recently fix 42,000 Mazda6 vehicles in China over the issue.