Mazda Mpv Lx(2002) on 2040-cars

Auto blog

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.

10 automakers shack up in Detroit hotel to talk Takata airbags

Since Takata has decided not to take the lead concerning potential issues with its airbag inflators, the automakers have. Perhaps that's unsurprising, since it's the automakers, not Takata, that will take a beating on the dealership floor if consumers decide its models are a health hazards. The Detroit News reports that Toyota, Honda, General Motors, Ford, Chrysler, Mazda, BMW, Nissan, Mitsubishi and Subaru met in a hotel conference room near the Detroit Metropolitan Airport last week to sort out a way to understand the technical issues involved. So far, faulty airbag inflators have been ruled the cause of five deaths and 50 injuries around the world, but neither Takata nor investigators understands exactly why the inflators are malfunctioning. The National Highway Traffic Safety Administration recently asked Takata to issue a national recall, Takata declined, citing a minuscule failure rate and the fact that it's still investigating the issue. Toyota and Honda then made an industry-wide appeal for "a coordinated, comprehensive testing program" that would pinpoint the problem inflators and get them replaced, and that's what the Detroit meeting was about. Numerous issues, however, will make this a long row to hoe: simply getting the parts to replace the nearly 20 million inflators in cars recalled around the world so far - even working with other suppliers - will take a years, but more importantly, no one knows if the replacement inflators currently being installed will suffer the same issue. Answers will hopefully come quickly with Takata, the ten automakers and NHTSA all independently investigating the problem.

Britain's BBR already promising 2016 Mazda MX-5 Miata with 200+ horsepower

The 2016 Mazda MX-5 Miata is one of Autoblog's most anticipated cars to drive this year, and with good reason. Thanks to svelte, angular styling, the promise of less weight, the possibility of more power and all at a fairly affordable price, it represents pure, automotive enjoyment. Mazda is still not saying exactly how much power the new Miata's 2.0-liter Skyactiv four-cylinder engine will make, but that isn't keeping British tuner BBR from already working out how to squeeze even more ponies from the mill – potentially as much as 200 horsepower with natural aspiration. The company bought a Mazda3 for access to its 2.0-liter Skyactiv and went to work on it. "Our objective with the all-new MX-5 is to achieve the same 200 bhp output that we can easily enjoy with simple bolt-on components on the current 2.0-litre NC model, before building on further power upgrades using forced induction," said Neil McKay of BBR in the company's release. The 3's version of the engine is rated at 155 hp and 150 pound-feet of torque but is expected to be tuned for additional grunt for the droptop. Still, it gives BBR something to experiment with before the real thing is available. The tuner also got the opportunity to take a look at a pre-production 2016 Miata and is already developing "subtle bodywork alterations" for the upcoming convertible. You can get a taste for the company's plans with the rendering above. It sports tinted lights, a front lip spoiler, lower side sills and a tiny rear spoiler. Scroll down to read more about BBR's plans in the official announcement. BBR UNVEILS STUNNING 200 BHP ALL-NEW MAZDA MX-5 CONCEPT Despite deliveries not scheduled to begin until July, legendary Mazda performance tuner BBR is making great progress with both its visual concept and powertrain development for the all-new MX-5. "A program of detailed performance enhancements has already commenced at our Brackley base," says BBR's Neil Mckay, "thanks to our investment in a 2.0-litre Skyactiv powered Mazda 3. Our objective with the all-new MX-5 is to achieve the same 200 bhp output that we can easily enjoy with simple bolt-on components on the current 2.0-litre NC model, before building on further power upgrades using forced induction." Having viewed a pre-production version of the car BBR is also working hard on visual enhancements to add more presence to the svelte lines of the all-new MX-5.