Mazda Cx-9 2wd 4dr Grand Touring Suv Automatic Gasoline 3.5l V6 Cyl Crystal Whit on 2040-cars

Auto blog

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.

Mazda CX-3 almost ready for LA Show

The Mazda CX-3 is just days away from its unveiling at the 2014 Los Angeles Auto Show, but elsewhere in the world, the Japanese brand still has the compact crossover disguised for testing. These spy shots aren't too camouflaged though, and when combined with the previous teaser image, they give a pretty clear idea what the new model will look like.
The grille here is well covered, but the photo from the front reveals the similarities to the design sketch. The rear shows a similar horizontally oriented design as the Mazda2, which the CUV is based on. However, the dipping sides around the B-pillar from the teaser don't appear to be on this tester. Even with all the swirls, the vehicle looks fairly attractive.
Mazda is doing a fantastic job of keeping mechanical details about the CX-3 a secret. It's not yet known whether the model is front-wheel-drive only or if all-wheel drive is also an option. The crossover also likely shares the Mazda2's engine, which isn't revealed for North America, yet. The diminutive CUV will compete with a huge crop of new classmates, including the Fiat 500X, Jeep Renegade, Chevrolet Trax and Honda HR-V. Check out the gallery for the latest glimpses of this Japanese CUV just days ahead of its full debut.

Why we can't have better headlights here in the U.S.

It wouldn't be a European auto show if we weren't teased with at least one mainstream vehicle we can't have here. At the Geneva Motor Show last week, the small but vocal contingent of shooting-brake buffs lamented that the Mazda6 wagon won't be coming to our shores, although they can take comfort in the fact that the vehicle won't get the torquey 250-horsepower 2.5-liter turbocharged gasoline engine we'll get here. Mercedes-Benz also announced a new headlight technology in Geneva that likely won't be available here anytime soon. It's just the latest in a long line of innovative and potentially lifesaving front-lighting solutions that the federal government doesn't allow in this country due to outdated standards — and a current lack of leadership at the U.S. Department of Transportation. Mercedes-Benz's new Digital Light system that debuted in Geneva uses a computer chip to activate more than a million micro-reflectors to better illuminate the road ahead. The Digital Light headlamps works with the vehicle's cameras, sensors and navigation mapping to adjust lighting for the given location and situation and to detect other road users. The Digital Light technology also serves as an extended head-up display of sorts by projecting symbols on the pavement ahead to alert drivers to, say, slippery conditions or pedestrians in the road. And it can even project lines on the road in a construction zone or through tight curves to show the driver the correct path. Digital Light will be available on Mercedes-Maybach vehicles later this year, although like any technology it's bound to trickle down to less expensive vehicles. That is, if we ever get it here in the U.S. Audi, a leader in automotive lighting, has repeatedly run into snags trying to bring state-of-the-art car headlights to the U.S. The German luxury automaker's recently introduced matrix laser headlight system, which performs many of the same trick as Mercedes-Benz's Digital Light, also isn't legal on U.S. roads. And five years after the introduction of its matrix-beam LED lighting, which illuminates more of the road without blinding oncoming motorists with brights by simultaneously operating high and low beams, Audi still can't bring that technology to the U.S. either.