Florida,awd,touring,3rd Row, 2tone Leather,back-up Camera,heated Seats,l@@k on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Mazda and Fiat finalize deal for Alfa roadster, next-gen MX-5 Miata

Although a little bit later than expected, Mazda and Fiat have signed a final agreement that will bring a next-generation MX-5 Miata to the Japanese automaker and a new roadster to Alfa Romeo. When the proposed arrangement was announced back in May, the two automakers had hoped to seal the deal last year, but it doesn't appear that the production timeline for these cars has slipped any, with both expected to start rolling off assembly lines in 2015.
Other than a shared chassis with a rear-wheel-drive layout, it sounds like the two cars are still planned to be distinct in their own ways from their styling right down to their engines. Mazda will produce both cars at a plant in Hiroshima, Japan, but it isn't clear what role each automaker will play in the cars' developmental process. The big question, of course, is what clever portmanteau name we can come up with, like Toyobaru. Mazda Romeo is the easy choice, but Alfazda might roll off the tongue a little better.
Scroll down for a brief press release from both automakers.

First batch of 2016 Mazda MX-5 Miatas lands in US [w/video]

Have you been patiently awaiting the arrival of the all-new 2016 Mazda MX-5 Miata? Then we're glad to report that your patience has paid off. In fact, even if you haven't been so patient, we're still glad to report that the wait is finally over, as the first batch of the new Japanese roadsters has arrived on American soil. The initial batch of several hundred MX-5s arrived at the port of San Diego from the factory in Hiroshima on board the Phoenix Leader, a 636-foot vehicle carrier ship registered in Panama and operated by Japanese shipping giant NYK Lines. The vehicles are currently being processed at the SoCal port, with deliveries to commence "in the next several weeks," according to Mazda in the brief statement below. The fourth-generation Miata, designated generation ND, mad its global debut at the Paris Motor Show, and its US debut at the LA Auto Show. Production commenced in Japan this past March. The new roadster arrives in US showrooms with a 2.0-liter four-cylinder engine (the smaller 1.5 kept away from these shores), a six-speed manual (replacing the previous five-cogger), a folding soft roof (no retractable hard top this time), and a starting MSRP of $24,915 (plus an $820 destination charge). That, of course, is for the base Sport model, with higher-spec Club and Grand Touring trims also on offer. Along with the images above, you can watch footage of the vehicles driving off the ship in the video below. Might we recommend, however, muting the cheesy soundtrack and playing something more suitable over it instead. Neil Diamond's (Coming to) America ought to do the trick... today! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Mazda Welcomes the First Shipment of All-New 2016 MX-5s Mazda North American Operations today welcomed the first shipment of the all-new 2016 MX-5s. They will begin their port processing procedures and deliveries will follow in the next several weeks. Featured Gallery 2016 Mazda MX-5 Miata: US Arrival Mazda Convertible Performance mazda mx-5 san diego port