2022 Mazda Cx-9 Touring Plus on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Mazda's next-gen SkyActiv engines will drop spark plugs in favor of high compression

Homogeneous charge compression ignition, or HCCI, is the black art of internal combustion engines that aims to produce diesel-like fuel efficiency for the cost of gasoline. Although some of its competitors have developed and subsequently given up on the tech, Mazda confirmed that the next-generation of SkyActiv engines will employ HCCI technology, improving fuel economy by 30 percent and at the same time reducing exhaust emissions. According to Nikkei, a new SkyActiv family of engines is set to debut under the hood of the next-gen Mazda3 sometime in 2018 before making its way into other vehicles. In simple terms, an engine that uses HCCI burns the air/fuel mix using pressure instead of with spark plugs, just like a diesel. At 14:1, Mazda's gasoline engines already have some of the highest compression ratios out there, but a move to HCCI means cranking up the compression to 18:1. While the tech sounds relatively straightforward, using HCCI means dealing with a number of side issues. It's one of those "on paper" ideas that compounds problems when put into practice. Heat, revs, and fuel must all be carefully managed as gasoline doesn't burn the same way as diesel. Mazda is mum on details, but the automaker seems confident that the issues have been sorted. If the new engines do indeed make it to market with HCCI, Mazda will have out-engineered GM, Daimler, and Hyundai, all of which have tried and failed to develop HCCI engines in a cost-effective package. With the market moving towards electrification, it's interesting to see Mazda still focusing so heavily on traditional internal combustion gasoline engines. It's an indication of where they see the market heading for the next few years. Although the automaker has been hesitant to move forward with hybrid and electric powertrains, Nikkei also reports that Mazda will begin mass production of EVs in 2019. Related Video:

Mazda3 celebrates 10 happy years

Mazda is on the cusp of unveiling an all-new Mazda3, but the compact will mark an important milestone before that happens. The very first Mazda3 rolled off of the assembly line on June 25, 2003. A decade later, the little car has snagged some 136 awards. The first generation sold 2.2 million units over the span of six years, and the second has smiled its way into the hearts of 1.4 million buyers since 2009. Mazda notes the machine even took the honor of being the top-selling passenger car in Australia in 2011 and 2012.
So, what will the future bring? The Japanese automaker is keeping the details to itself for the moment. From the spy photos we've seen, it looks as if the new design will fall under the company's new Kodo design philosophy. That same language brought us the perilously sexy Mazda6, and the new Mazda3 should be no less attractive. You can check out those photos here.
You can also read the full press release on the compact's 10-year anniversary below.