Touring Suv on 2040-cars

Auto blog

Fiat 124 caught entirely undisguised

Dear automakers, please continue making these kind of mistakes. Thanks to what we're guessing is some lax security, the all-new, Mazda MX-5 Miata-based Fiat 124 was spotted taking part in a photo shoot near Santa Barbara, CA. The images show what we'd consider a fairly simple rebadging job. The 124 gets new front and rear clips that not only harken back to the original 124 (not to mention other Fiat roadsters, like the Barchetta), but also serves to distance this droptop from the rest of the company's US range. The similarities between the 124 and the car it's based on are even more obvious in the cabin. This is an MX-5 interior with Fiat's big, red badge on the tiller. That means the same quality materials and knob-dial infotainment system that have been so well received in the Miata. It's under the hood, though, where the Fiat really differs from its Japanese cousin. According to our spy, the vehicle shown here features some kind of two-pedal setup – probably the six-speed Euro twin-clutch used in the 500L and Dodge Dart. Don't worry, though, a six-speed stick will also be on offer. Regardless of transmission, we can expect a 180-horsepower version of the 1.4-liter, turbocharged, four-cylinder offered in the 500 Abarth. And if that's not enough good news, a dedicated Abarth model will likely arrive after launch, which our spies claim will use the 1.75-liter turbo and DCT from the Alfa Romeo 4C. While this represents a good look at the new 124, we'll probably be waiting until the LA Auto Show in November for the official look. Stay tuned.

This is what a 1,200-hp twin-turbo 4-rotor looks like in a Miata

We've seen the diminutive Mazda MX-5 Miata swallow plenty of big engines, but New Zealand drifting ace "Mad Mike" Whiddett is roaring into where-no-man-has-gone-before territory. Wanting to replace his 515-horsepower "MADBUL" RX-7 and its twin-turbocharged, three-rotor 20B engine, his new ride is an NC-series Miata with four rotors and twin Garrett turbochargers courtesy of Pulse Performance Race Engineering. It is called "RADBUL," and expected power at standard boost is 1,200 hp, but the builders at Pulse Performance think it will get up to 1,500 hp at full boost. And yes, that exhaust exits through the hood. Four-rotor engines are actually popular - builds are detailed on forums like this one from 2007 and this one from 2008, this UK company or this Canadian company will sell you one complete - but they're usually being prepped for an RX-7. Mad Mike's choice of a Miata for this enterprise makes this about as extreme as you can get, short of throwing it into a Mazda R360. You can watch Mad Mike tell the story of the build in the video, and check out the first and second installments about the build on the Red Bull site.

Mazda CX-9 Luggage Test | How much fits behind the third row?

We recently tested the luggage-carrying capability of one of the most spacious three-row crossovers, the Hyundai Palisade, and now it's time for one of the smallest. The Mazda CX-9 may look terrific and drive even better, but that zest comes at the expense of cargo capacity, as we're about to see. The big culprit is that rakish liftgate, which not only robs the CX-9 of luggage space, but third-row headroom as well. It's pretty dungeon-like back there despite competitive legroom, and there aren't any air vents or USB ports, either. But this is about cargo capacity, so let's see how much luggage will fit inside. According to the specs, the CX-9 has 38.2 cubic-feet with the third-row lowered. That's far less than the Palisade's 45.8 and Honda Pilot's 46.8. It's actually even less than the five-passenger Honda Passport (50.5).  The test car came with a $100 cargo mat, which is velcroed to the seats and folds OK with it, but the carpet also takes up some extra space ... and the CX-9 needs as much as it can get.  To raise the seats, lean inside and pull up/back on those two handles. There is 14.4 cubic-feet of space behind the raised third row. On paper, that is indeed one of the smaller amounts in the segment, but in practice, it seems even smaller.  You can free up space by removing the rigid floor panel. If you need to carry multiple pieces of luggage, it's almost a necessity.  OK, so I have two midsize roller suitcases, both of which would need to be checked. Then there's two larger carry-on roll-aboards and one smaller one. As a bonus, there's my wife's quasi-fancy weekend bag. It was a struggle to fit three of them aboard, and Tetrised together two formations. The first uses all three carry-on bags with the cargo floor removed. And no, the fancy bag won't fit atop the blue one because it'll run into the liftgate window. A smaller tote would definitely fit, however.  This is how I could fit one of the bigger check-in bags. The liftgate just barely closed. Again, you could fit a small tote atop the blue bag, plus some other items in the lower outboard regions.  OK, so how could you fit everything aboard? Lowering half of the 50/50-split third row is a must, obviously. Both big check-in bags then stack atop each other, and then stack the other four atop each other with the cargo floor in place.