2010 Mazda Cx-7 Sv Sport Utility 4-door 2.5l on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Mazda3 celebrates 10 happy years

Mazda is on the cusp of unveiling an all-new Mazda3, but the compact will mark an important milestone before that happens. The very first Mazda3 rolled off of the assembly line on June 25, 2003. A decade later, the little car has snagged some 136 awards. The first generation sold 2.2 million units over the span of six years, and the second has smiled its way into the hearts of 1.4 million buyers since 2009. Mazda notes the machine even took the honor of being the top-selling passenger car in Australia in 2011 and 2012.
So, what will the future bring? The Japanese automaker is keeping the details to itself for the moment. From the spy photos we've seen, it looks as if the new design will fall under the company's new Kodo design philosophy. That same language brought us the perilously sexy Mazda6, and the new Mazda3 should be no less attractive. You can check out those photos here.
You can also read the full press release on the compact's 10-year anniversary below.

Alfa Romeo takes Spider in-house, Mazda-Fiat roadster partnership not dead

It's officially off. Following a report in March of this year that the marriage of Mazda and Alfa Romeo to produce a MX-5-based Spider was in trouble, the Italians have confirmed that it will take development in-house. "As far as the Spider goes, the final version is of course no longer the two-seater FCA co-developed with Mazda but a derivative of Project Giorgio," Maserati and Alfa Romeo brand boss Harald Wester told Car. For those not in the know, Project Giorgio is Alfa's codename for the rear-drive platform that will underpin the next-generation Spider, not to mention the replacement for the 159 sedan and a few other products. All is not lost for the Japanese-Italian partnership, though. "The Far East import will probably find a new home with Fiat-Abarth," Wester told Car. Yes, you read that correctly, Mazda is still working with FCA, and the result will eventually end up with Abarth's scorpion badge. If anything, we're more excited over this news than the idea of an Alfa MX-5. But we want to know what you think – would you rather Alfa build a new Spider on the Miata's bones, or does an MX-5 Abarth sound like more fun? Have your say in Comments.