07 Mazda Cx7 Touring, Leather, Heated Seats, Perfect Service History, Very Clean on 2040-cars

Auto blog

Mazda recalls 109k Tribute models for rust issue

The Mazda Tribute is being hit with a similar recall as its platform-mate the Ford Escape underwent a few weeks ago. Mazda is recalling 109,000 Tributes from model years 2001 to 2004. On the trucks, the subframe can rust from road salt, potentially causing the lower control arm to detach. If this happens, a loss of steering control could occur.
Mazda is adding a reinforcement crossbrace for added strength on the affected models. The recall covers Tributes currently registered in or originally sold in 20 northern states and Washington, DC, where road salt is used.
The reinforcement braces aren't available yet to do the repair. Mazda will send a letter in May to owners of affected vehicles that will inform them of the problem, and a second letter telling them when the parts will be ready. Scroll down to read the full recall press release.

The 2017 Mazda CX-5 is new, and oh so very red

After examining the teaser photo and poring over spy photos, we knew that the 2017 Mazda CX-5 would adopt some design features from the larger CX-9 and Chinese-only CX-4. What we didn't know, though, is that the CX-5 would look like a miniature version of the CX-9. From the outside it's obvious the design is all new. The front of the SUV looks nearly identical to that of the CX-9's. Gone is the cutesy, roundish face in favor of a more angular theme. The headlights are slimmer, while the grille ditches the horizontal bars for a mesh pattern. Mazda calls the design theme Kodo - soul of motion, and the original 2013 CX-5 was the first production model under this mantra. View 12 Photos The changes at the back are less drastic than on the CX-5's new beak. The black trim that underlines the rear fascia is less prominent and the taillights looks leaner, but it's harder to tell the differences between the old and new model. Mazda says the CX-5 will be available with two engines here: the Skyactiv 2.5-liter gasoline engine and the Skyactiv-D 2.2-liter diesel (the Skyactive-D 2.0-liter, currently only used on Sport models, has been dropped for our market). We don't have specifics on power and torque yet, but in the old CX-5 (and current Mazda 3) the 2.5-liter four-cylinder generates 184 horsepower, while the diesel makes 173 hp and 310 pound-feet of torque. We expect front- and all-wheel-drive options, and of course we're hoping that the six-speed manual (previously on the base, front-drive model only) stays around as an alternative to the six-speed automatic. The interior follows the template of recent Mazdas, with the infotainment screen sitting on top of the dashboard with a control knob located aft of the shift lever. We'll have more information on the 2017 CX-5 at the vehicle's debut later today at the 2016 Los Angeles Auto Show. Related Video:

50 engineers kept the rotary alive at Mazda for 8 years

The Mazda RX-Vision concept is one of the standouts at this year's Tokyo Motor Show thanks to a drop-dead gorgeous design and a revival of the Wankel engine. The fact that the rotary is still in development at Mazda is thanks to a dedicated group of 50 engineers. According to Automotive News, their dream for the last eight years has been to bring this storied engine design back to the street. It won't be easy. Because of its design, the rotary suffers from poor fuel economy and high emissions. Making the challenge even harder, Mazda reportedly only gives them a small budget, but they continue to chip away at the problem. "These 50 engineers want to develop the rotary engine, therefore they joined Mazda," company research and development boss Kiyoshi Fujiwara told AN. "If I stop the rotary engine, probably they want to leave." For the Skyactiv-R under the RX-Vision's svelte hood, the team reportedly started from the 16X rotary project. Dating back to 2007, that 1.6-liter engine was supposed to improve torque and fuel economy thanks in part to direct injection. After additional development, insiders even suggested that the engineers might have finally solved the powerplant's issues. However, Mazda never put the mill into production, and the RX-8 remains the company's last Wankel-powered model to be offered in showrooms. "We have a dream that one day, this design with a rotary engine will achieve a level that customers will accept," CEO Masamichi Kogai said to AN. Mazda is quite clear that the RX-Vision might never go on sale without a suitable rotary. Although if it does see production, the coupe would likely use a stiffened version of the Miata's chassis, AN reports. Before anyone can place an order, these 50 determined engineers still have a lot of work ahead of them. Related Video: