2021 Mazda Cx-5 Touring on 2040-cars

Auto blog

Mazda halts Mazda3 sales for fuel tank problem

Mazda is issuing a stop sale and recall on 14,406 examples of the 2015-2016 Mazda3 in the US with build dates between May 21, 2015, and August 24, 2015, due to a possible fuel leak. There are no reports or accidents or injuries from this problem. According to the company, a defective fuel shut-off valve can allow gasoline to move from the tank and fill the charcoal emissions canister. If it gets too full, there can be a leak, which obviously carries the risk of a possible fire. The engine might stall, as well. Affected owners will be notified to bring their Mazda3 in "as soon as possible." Dealers will inspect the vehicles, and if a problem is found, the fuel tank and charcoal emissions canister will be replaced. During the downtime, customers will get a free rental or loaner car, as well. Those who are particularly concerned can also call Mazda roadside assistance to have their vehicle delivered for the check and possible repair. Related Video: Mazda Issues Stop Sale and Stop Delivery for Mazda3 Fuel Tank Recall WASHINGTON, DC (October 2, 2015) – Mazda Motor Corporation will conduct a Safety and Emission Recall Campaign for certain 2015-2016 Mazda3 vehicles (built from May 21, 2015 through August 24, 2015), which could have a safety-related problem. A defect in the fuel shut-off valve may allow fuel to flow from the fuel tank into the charcoal emissions canister. With this condition, the check engine light may illuminate, and if the fuel exceeds the canister capacity, fuel leakage could occur, increasing the risk of a fire and/or engine stalling. Approximately 14,270 vehicles in the U.S. and 136 vehicles in Puerto Rico are affected. Owners of subject vehicles will be notified by mail in early October. They will be informed to bring their vehicle to the nearest Mazda dealer as soon as possible. Dealers will inspect the fuel tank to determine if the defect exists on the vehicle. If the defect exists, the dealer will replace the fuel tank and charcoal canister at no cost to the customer. A rental or loaner vehicle will be provided at no cost to the owner, until the vehicle is repaired for this concern. If there are no concerns, the vehicle will be returned to the customer. Should a customer not want to drive the vehicle to the dealership, they may contact Mazda's 24-hour Roadside Assistance service at 800-866-1998 and have the vehicle picked up and delivered to the dealership. There have been no reports of accidents or injury related to this issue.

2016 Mazda MX-5 Miata shows off perfect 50/50 weight balance

When I attended the first drive event for the Japanese-spec 2016 Mazda MX-5 Miata in Spain earlier this year, I was blown away – and not just by the car. I was blown away by the charts and graphs Mazda's engineers brought along, showing how every little facet of the ND Miata was finely tuned for pure driving perfection. It's like rocket science. Only cooler. One of the most important parts of the Miata package is its weight distribution. The 2,332-pound roadster must achieve a perfect 50/50 balance, with a driver inside. That's not easy. But it has to be done. Only the best for the Miata. In this video, Mazda shows off the Miata's balance by putting it on an aluminum balance beam, to see if the car stays perfectly centered. You can probably guess the outcome, but watching it all take place is super cool, especially with commentary by Mazda engineer Dave Coleman and MX-5 program manager Rod McLaughlin. How does the 50/50 balance help the Miata's handling out on the road? You'll have to wait until the embargo on driving impressions for the US-spec car lifts. We'll have the full scoop at 3:01 AM Eastern on Monday, June 1. In the meantime, get a sneak preview of the new Miata in the video below. Autoblog readers got a closer look at the 2016 MX-5 at our Cars & Coneys meet-up, and as you can see, the excitement for this car is definitely real.

Mazda Miata speedster and spyder concepts set for SEMA

Mazda will show speedster and spyder concepts based on the 2016 MX-5 Miata next week at SEMA in Las Vegas. The speedster is at the top of the teaser, and the spyder is the bottom half. The speedster goes with an extreme lightweight design. It has only a small wind deflector in place of the windshield and a blue ether topcoat. The spyder is a vintage roadster rendered into a modern form with a handcrafted leather interior and mercury silver paint job. Both are lighter than the production version and will be sure to get the hearts of Mazda fanatics and roadster enthusiasts alike racing at the possibilities. We doubt either will actually see production, like so many Miata-based concepts of the recent past. But that won't stop us from dreaming all the same. MAZDA TO SHOWCASE LIGHTWEIGHT PERFORMANCE AT SEMA WITH TWO MX-5 MIATA CONCEPTS - MX-5 Spyder and Speedster Concepts Bring Vintage Cues into Modern Designs - IRVINE, Calif., Oct. 29, 2015 -- The Mazda MX-5 Miata has been an exercise in honing the concept of a lightweight sports car for more than 26 years, created solely for driving exhilaration. But for the 2015 SEMA Show at the Las Vegas Convention Center, Mazda designers wanted to see what they could do if that idea was taken to the extreme. What they created were two vastly different takes on the fourth-generation MX-5: The 2016 MX-5 Spyder Concept and 2016 MX-5 Speedster Concept. MX-5 Spyder captures the character of a vintage roadster and translates it into a modern-day design, including bespoke leather interior details that were painstakingly crafted, and featuring a new Mercury Silver concept paint color. MX-5 Speedster is a study in the extremes of lightweight, purpose-built performance, paying homage to minimalist roadsters of the 1950s. The Blue Ether-painted MX-5 Speedster is uncompromised in its approach to wind-in-the-hair driving, going so far as to eschew a traditional windshield for a lighter deflector. Both cars are significantly lighter than the 2,332-lbs. MX-5 roadster that customers can purchase at dealers and come with a host of conceptual and aftermarket pieces and fabrication from partners including Racing Beat, Haartz Corporation, ASC – American Sunroof Corporation, Makin Industries/RAYS Wheels, KW Suspensions, Delta Seat, H&R Springs, Lusch, AC&A Manufacturing, Franks Fab Shop, Long Road Racing and SIM Specialty Interior Manufacturing.