1991 Mazda B2200 Se-5 Standard Cab Pickup 2-door 2.2l on 2040-cars

Auto blog

2016 Mazda2 won't come to the US

Hoping to get your hands on the new Mazda2? Don't get your hopes up too high, because the latest word has it that the new hatchback won't be available in the United States. According to the report from Automotive News, Mazda's US office has decided against bringing the new Mazda2 to American showrooms. This despite it being made just south of the border in Salamanca, Mexico. The reasons are apparently two-fold. For starters, Mazda sales offices around the world have been clamoring for larger allotments of the new 2, and the company can only supply so many. "We could have had it, but we would have had a number that didn't make much sense with 600 dealers and with the marketing it takes to launch a new car," Robert Davis, Mazda's senior VP of US sales operations, told AN. For another, Mazda is apparently not convinced the new supermini would resonate with US buyers, who are increasingly migrating towards crossovers. So Mazda is focusing instead on "products that make us and our dealers considerably more profit than a Mazda2 does." That doesn't mean the latest Mazda2 will be entirely out of our reach forever, though. The company's agreement with Toyota will see a sedan version sold in the US as the Scion iA. Mazda is also certifying it to US safety and environmental standards so that it can sell the 2 in Puerto Rico, which means that it wouldn't take much to change course and bring the hatchback into the US in the future: "It'll always be there if we need it," Davis told AN. Reached for comment, a spokesman for Mazda's North American operations told Autoblog that "The Mazda2 launch in the U.S. market is on hold in order to evaluate the B-Car segment and enable us the opportunity to focus on the launches of the refreshed Mazda6 and CX-5, and the all-new MX-5 roadster and CX-3 subcompact crossover SUV." That leaves the aforementioned CX-3 - which is, incidentally, based on the same architecture as the Mazda2 - as the smallest mainstream model that Mazda will offer Stateside.

Mazda rumored to bring rotary-powered RX-9 concept to Tokyo

Stop us if you've heard this one before: Mazda will bring a rotary-powered sports car to the next big auto show. Okay, so we stopped for a second, but the show must go on. Following an official teaser image (shown above) late last month, Motoring.com.au has what it claims are renderings of the curvy, two-door coupe – called the RX-9 – that Mazda will bring to the Tokyo Motor Show later this month. The images show a far softer styling than Mazda's current crop of Kodo-inspired vehicles, while the overall look screams of a modern-day Cosmo Sport, the Japanese brand's first rotary-powered vehicle. And though that connection alone might be enough to justify whisperings of a successor to the RX-7 and RX-8, Motoring claims there will be an even more overt sign of this concept's power source. "Look to the Cosmo Sport," an inside source told the Aussie website, signaling that the Mazda stand would feature the vintage two-door. "The Cosmo has no earthly reason for being there unless..." The rotary rumor, if it comes true, won't exactly be what we're use to. While Motoring brings up the previously reported 16X – a 1.6-liter two-rotor – it builds on our 2013 report. According to the Aussies, the new engine could feature a two-stage electric turbocharger, be paired with a hybrid powertrain, offer up to 450 horsepower, and we're guessing, be hilariously complicated. Joking aside, it sounds like Mazda's goals here are admirable. A rotary-equipped sports car that could counter the 1.3-liter RX-8 engine's appetite for fuel and improve on its mediocre low and mid-range torque would be interesting indeed. As for those renderings, Motoring has front and rear three-quarter images. Comparing the rear with our original teaser leaves the look open to interpretation, but after seriously upping the exposure on the teaser (thanks Photoshop), the taillights and overall profile shape look to be a spot-on match. In front, the long hood shares some Kodo elements, like the headlights and grille, but its undeniable coupe shape – a long hood and very short deck – are far more organic and, dare we say, calm, than Mazda's other vehicles. You can take a closer look at the renderings over at Motoring's website. Do that, and then head back and let us know what you think of these RX-9 rumors. Is Mazda finally going to be bringing a rotary back to market?

This California rally is vintage Japanese car heaven

What's so good about the future? This is what I was thinking when some folks at Mazda invited me and a handful of other journalists to join them on the second-annual Touge California. It's a rally for classic Japanese cars that covers a huge chunk of Southern California's twistier roads, where fans get to test their beloved machines. Oh, and it attracts swarms of admirers with cameras. "It is not a race. It is a vintage touring rally," said Ben Hsu, editor in chief of Japanese Nostalgic Car, and one of the coordinators of the event. "In Japan, touge most definitely refers to racing, whether timed, in touge battles, or drifting antics. Touge California was created to give drivers of Japanese classics a taste, as close as possible, of the types of roads their cars were forged on." Touge California was created to give drivers of Japanese classics a taste, as close as possible, of the types of roads their cars were forged on. We started the day on a mundane stop-and-go freeway drive from Mazda's Irvine headquarters to Escondido, me riding shotgun with my journalist co-driver in a 2016 Miata. But Mazda also brought along three heritage products on this trip – a 1985 RX-7 GSL-SE, a 1978 GLC three-door hatchback, and a 1975 REPU (rotary engined pickup) – serving as reminders of the company's history in the U.S. The group of Mazdas was joined in Escondido by many more Mazdas. And Toyotas, Hondas, Datsuns – so many 240Zs – and the odd Subaru and Mitsubishi. In total, 28 cars were at the start line. "We doubled the field this year, and made the route longer – 200 versus 120 miles," Hsu said. "We separated the cars into two run groups based on speed and a mix of makes and models." I spent the first part of the rally in the Mazda pickup to get a taste of rotary power. It was my first experience behind the wheel of a Wankel-powered vehicle, my first time driving a small Japanese truck from the '70s, and my God that thing has a lot of power. I had a few scares when I had to stand on the brakes, and I found the shift throw's immense length disconcerting – it felt like third gear engaged somewhere in front of the dashboard, with fourth somewhere in the bed. The truck was a great introduction to the rotary, however, and to '70s Japanese cars. Especially in Southern California, old Japanese cars aren't as novel to casual observers as they might be in other parts of the country.