1999 Mazda 626 Es Sedan 4-door 2.0l on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Will the new Mazda Miata be available with multiple engines?

At this point, the countdown until the launch of the all-new, fourth-generation 2016 Mazda MX-5 Miata can be measured in hours until its September 3 unveiling as easily as it can in days. With the debut of such a highly anticipated model so close, the rumors about the new sports car are starting to boil over.
We recently heard that the new Miata would likely get a 2.0-liter Skyactiv four-cylinder with a six-speed manual, plus a decent drop in weight compared to the current gen. There's even the rumored possibility of a fastback coupe version sometime in the future.
Now, Australia's GoAuto is adding another dollop of speculation into the mix with the claim that there could be "potentially more engine options," according to Mazda Australia managing director Martin Benders to the website. The more potent option would still be the 2.0-liter Skyactiv with a power bump from its current 167 hp to closer to 200 ponies. The other possible powerplant option would be a 1.5-liter, naturally aspirated four-cylinder taken from the upcoming Mazda2 replacement. This version would also ditch some of the MX-5's more premium features to cut the weight and the price slightly.

'Ringbanana' Miata is improbable 9-minute Nurburgring car

The combination of being inexpensive, capable, reliable, and friendly to all skill levels makes the Mazda Miata one of the world's most popular platforms for motorsports, but the roadsters aren't exactly rocketships. What would it take to lap a ratty, first-gen example around the Nurburgring Nordschleife in less than nine minutes? We're not exactly sure, but the Ringbanana team intends to discover the answer. The project is the type of thing that gets dreamed up after a few too many pilsners: buy the cheapest running Miata available and put as little money necessary into the roadster to make it capable around the 'Ring. As the Best-Motoring-inspired intro explains, the Mazda is largely stock other than some Fulda performance tires, possibly aftermarket springs, and a stripped interior. The video above shows the baseline test, and the convertible manages a 9:21.8 circuit, which doesn't seem too bad as a start. The video below goes into far more detail about the project's genesis and its goal. Plus, the two hosts are quite entertaining when replying to the comments from the original clip. We wish them the best of luck and look forward to following along on Facebook to see what it takes to get the Ringbanana below nine minutes. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.