2005 Maserati Coupe In Blue Nettuno Metallic on 2040-cars

Auto blog

Maserati MC20 GT2 returns the Trident to GT racing in 2023

Seems we got ahead of Maserati, but now we're on the same page with the Italian carmaker. We wrote about the Maserati Project24 earlier this week, a limited-edition track car not built to race a specific series, instead chasing Maserati's own performance targets. We wondered whether the Project24 was a pivot from the rumored GT3 program planned for the MC20 years ago. Turns out the Project24 is an offshoot of the GT2 program for the MC20, the Italians in Modena announcing they've developed an MC20 GT2 to compete in the Fanatec GT2 European Series Championship next year. The base tech specs listed so far for the MC20 GT2 are the same as the Project24. The twin-turbo Nettuno V6 shifts through a six-speed sequential auto with paddle shifters, sending power to the rear wheels through a mechanical limited slip differential. Brembo CCMR racing brakes hang off a double wishbone suspension with anti-roll bars front and rear and adjustable dampers, just behind custom, forged 18-spoke center lock wheels on racing slicks that can be changed easily thanks to on-board air jacks. A single seat in the cabin is accessorized with an adjustable, multifunction carbon fiber steering wheel, an adjustable pedal box, and air conditioning. Safety features include an FIA fuel tank, rain light, roll cage, six-point harness, and fire extinguisher.  The differences that we know of include output, curb weight, and the aero package. Series organizer SRO says GT2 is "formulated to bring gentlemen drivers back to the front of the stage ... whilst being fast and spectacular enough to secure the values of SRO-promoted championships, should the current GT3 category become too expensive for too many of our teams and drivers." GT2 regulations cap output at around 630 hp, just nine more than the standard MC20 throws down — and 110 hp less than the Project24. The series' Balance of Performance rules will ultimately determine race weight and output. The regulations also draw limits around aero devices that Maserati Stile didn't need to heed on the Project24. The aero bit is especially important here because GT2 cars are more powerful than GT3 entries but designed to be less reliant on aerodynamics than GT3 cars, making GT2 versions easier for amateurs to drive at the limit.  This is Maserati's first dip back into GT racing above the GT4 class since the MC12 GT1 that snagged close to 100 wins between 2004 and 2010. The race division will sell cars to individuals and race teams.

Bizarre Levante mule proves SUV will ride on Maserati platform

When Chrysler was developing the current Jeep Cherokee, matte black, lifted Alfa Romeo Giuliettas weren't an unusual site around the company's Auburn Hills, MI headquarters. That's because the Jeep rides on a modified version of the Alfa's platform.
Judging by these images, Maserati is following a similar path for the upcoming Levante. The presence of the modified and lifted Ghibli basically confirms that the company will look in-house for the new CUV's platform rather than outsource it to Jeep (otherwise, we'd be seeing modified Grand Cherokees running about).
The mule's Ghibli body has been fitted with a number of tweaks. Most notable are the higher roof and stretched wheel arches, which we're guessing are an attempt at increasing the sedan's center of gravity and width, respectively, in a bid to match the eventual production model.

Baby Jeep to join Renegade in FCA's plan for new Italian-built models

FCA is boosting its European production, introducing new models that will be built in currently under-utilized manufacturing facilities. Among the new models is a new small Jeep, smaller than the current Renegade, as Automotive News reports. FCA's Mike Manley mentioned the entry-level Jeep model earlier this year, also saying that the vehicle is targeted to European and possibly Latin American customers; in the summer, Autocar placed the launch date in 2022. The new "baby" Jeep would be made in the same factory in Pomigliano, Italy, as the small Fiat Panda, which is a top seller in Italy. The current generation Panda was introduced in 2011; if it gets a replacement in 2022, it could possibly share a platform with the Jeep model — or, the Jeep could be an eventual outright replacement for the Panda. One of Fiat's earlier core products, the Punto hatchback, was canned in August, and that production capacity will be used to make the Jeep Compass instead, at the Renegade-producing Melfi factory in southern Italy. The Compass has not previously been built in Europe. The Fiat model portfolio would be shrunk to just the 500 model family and the Panda — the 500 would also be FCA's key electric vehicle offered in Europe. It is not yet clear whether the electric 500 would be made in Turin, Italy, or in Poland; Turin might also get a Giardiniera-badged wagon version of the refreshed 500. As for the Alfa Romeo brand, it is set to gain an even bigger SUV model than the Stelvio, based on the Maserati Levante's platform. The Levante's sales have suffered recently in China, but Maserati does have light in the horizon: The Alfieri 2+2 grand tourer is still in the cards, with a launch expected for 2020 and both a convertible and an electrified version planned to follow. The Alfieri would be made in Modena, Italy, according to Automotive News' sources. None of these plans namedrop the storied Lancia brand, which has been shrunk to just the Ypsilon hatchback, based on the same platform as the current 500 and Panda. Despite that, the Ypsilon was again the second-bestselling car in Italy after the Panda in October. It is unlikely that FCA will be able to ignore this, but it is just as unlikely that any development money will be afforded to come up with a replacement for the Ypsilon, which is as similarly old as the Panda. Perhaps official announcements expected on Thursday will also clarify what will happen to Lancia.