2010 Lotus Evora Back Up Camera Park Sensors on 2040-cars

Auto blog

Behind the scenes of Lotus' spectacular truck-over-F1 jump

A Lotus F1 car and the truck in which it's transported may both be powered by Renault and share a common JPS livery, but as far as size and performance are concerned, they're at opposite ends of the spectrum. So if you had to jump one over the other, you'd think it'd be a no-brainer to skip the single-seater over the tractor-trailer. Right? Well that may be the more logical conclusion, but it's not the way the Lotus team and its technology partner EMC decided to go for this latest promo. Instead they jumped the semi over the grand prix car. The stunt was obviously geared towards publicity, but while they were at it, they set a Guinness World Record for the longest truck jump at 83 feet, 7 inches. The previous record, according to Guinness, stood at 50 feet, 6 inches, and was set on MTV's Nitro Circus on November 17, 2008, by Gregg Godfrey at Rocky Mountain Raceway in Salt Lake City. That record stood for six years, but (as best we can tell) was set without the trailer attached, or the F1 car tracking underneath - which only makes this latest stunt that much more impressive. You may have seen the promo clip circulating the interwebs late last week, but we've included a making-of video below as well to show how the stunt team managed to pull it all off. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: EMC via YouTube (1), (2)Tip: Joe Lotus Renault Truck Videos F1 viral video semi lotus f1 team

Lotus is building 60 extra light, extra aerodynamic Exige Cup 380s

Lotus is never done adding lightness and once again turned its attention to the Exige. Like so many other special Lotuses, this one, called the Exige Cup 380, makes the same 375 horsepower from its supercharged 3.5-liter V6. However, the weight savings is a significant 117 pounds compared with the 2,447-pound Exige Sport 380. This savings comes from the inclusion of many carbon-fiber parts including a one-piece rear hatch, side intakes, hood, front splitter, side sills, and seats, among others. Lotus also removed the gas struts for the hatch to save 2.2 pounds. And if that's not enough, you can save another 2.2 pounds by choosing the optional HVAC and air vent surrounds, and 22 pounds with an optional exhaust system. The Exige Cup 380 also produces significantly more downforce than the Sport, 43-percent more to be exact. That results in maximum downforce of about 441 pounds at the Cup 380's top speed of 175 mph. The car achieves this thanks to a revised front bumper and splitter, vents above the front wheels, more vents behind the rear wheels, and a new rear wing. Even the windshield wiper rests in a vertical position to aid aerodynamics. The Cup 380 doesn't just benefit from better aerodynamics and less weight. The rear tires are wider than the Sport 380 at 285 mm. The Cup 380 also has two-way adjustable shocks and adjustable front and rear anti-roll bars. Even the stability control can be adjusted to the driver's needs. The car is stopped by four-piston brake calipers at all four corners, and a standard steel roll bar protects the driver. If owners wish, they can also add an FIA-certified full roll cage. Lotus will only build 60 of these Exiges, and they're only available in Europe. They're not cheap either. In the UK, buyers will spend GBP83,000 in the UK and ˆ109,900 in Europe. That means this Exige would cost between $106,000 and $118,000, at current exchange rates. Related Video:

Lotus C-01 motorcycle shows its carbon-fiber face

Well, this isn't exactly what we were expecting. The images you see above come from Motorcycle News in the UK and are apparently official renderings of what the upcoming Lotus C-01 motorcycle will look like. As you can see, it's sort of a power cruiser, with a raked-out front end and extremely wide rubber out back.
Power will reportedly come from a liquid-cooled V-twin engine sourced from KTM, similar to the one used in the Austrian's brand's own RC8R, but tuned to produce around 200 horsepower. It appears that the powertrain and all its related necessities will be housed in a carbon fiber monocoque (whether the bodywork serves as a stressed member or not, we can't say) in a traditional-looking black (really, exposed carbon fiber weave) and yellow color scheme.
From the looks of these renderings, the C-01 might be intended as a competitor for the Ducati Diavel and ought to be very quick in a straight line. We're not so sure that's what a motorcycle wearing the Lotus badge should be, even if its builders are only using the marque's name under license, but we're looking forward to seeing the final result in production trim.