1995 Lincoln Continental Signature Sedan 4-door 4.6l on 2040-cars

Auto blog

2015 Lincoln MKC aims to rejuvenate the brand... again

Ford is slowly but surely attempting to revitalize the Lincoln brand, with the new MKZ sedan pointing the way forward for the Blue Oval's struggling luxury division. Here at the LA Auto Show, Lincoln is showing the next new product that aims to give the brand new life, the 2015 MKC crossover.
The MKC is based on the trusty Ford Escape, but this is far more than just a rebadge job. Lincoln has used completely new sheetmetal here, with the brand's familiar split-wing grille front and center, and a classy, wraparound tailgate with super slim taillamps that span the width of the hatchback. It's one of the better applications of Lincoln's new design language we've seen thus far, and the end result is a taut-looking crossover that is at the same time both modern and luxurious-looking.
Further differentiating itself from the Escape, the MKC packs an all-new 2.3-liter EcoBoost four-cylinder engine, good for 275 horsepower and 300 pound-feet of torque. (On the base end, Ford's 2.0-liter EcoBoost four-cylinder with 240 hp and 270 lb-ft is available.) The MKC also uses a new Continuously Controlled Damping adaptive suspension, and is available with both front- and all-wheel drive.

Lincoln Aviator vs Cadillac XT6 | How they compare on paper

There have been big, three-row family crossovers for quite a while now, but until recently the luxury market hasn't fully embraced them. Sure, you could literally get one with a third row, but unless you were a kid, chances are the term "dungeon-like" was going to be tossed around. Things are changing now, however, as new and redesigned entries are starting to hit the market. We've recently had a chance to get our first drives of the 2020 Lincoln Aviator and 2020 Cadillac XT6, two all-new three-row crossovers from American luxury brands. We also got a turn behind the wheel of the updated 2020 Volvo XC90. However, since none of our editors have yet to drive to drive them all, we wanted to see how they compare on paper, examining their engine specs and interior dimensions. We also included the 2020 Acura MDX, the original three-row luxury crossover, which continues to sell well despite approaching the end of its current generation. That it offers a hybrid model makes it that much more applicable given the Aviator and XC90 also offer gasoline-electric powertrains, albeit of the plug-in variety. 3 Row Luxury Crossovers Powertrains View 1 Photos Non-hybrid MDX has a 5,000-pound max tow rating. How do their performance and fuel economy compare? This one is absolutely no contest. The 400-horsepower Lincoln blows away its competitors despite having a price tag that's similar to the 310-horsepower Cadillac and in between the XC90's T5 and T6 models. At least the Acura is considerably cheaper. Besides the eye-popping output, the estimated 0-60-mph time of 5.5 seconds (gleaned from the mechanically similar Ford Explorer ST) is appreciably quicker than the others. Now, fuel economy is a bit lower, but the efficiency of Volvo's four-cylinder engines are likely more susceptible to varying due to driver differences. It should also be noted that the Cadillac gets the same combined fuel economy estimate as the Aviator despite having 90 fewer horses and 144 fewer pound-feet of torque. Just one of the ways where the XT6's prospects dim in the presence of its cross-Michigan rival. The Cadillac is also not available as a hybrid model. The others are, but are disparate. The Lincoln Aviator Grand Touring and Volvo XC90 T8 are similar in concept: range-topping models that are as much about adding performance as they are fuel economy. Their hefty price tags certainly reflect that as well.

Lincoln Nautilus, Ford Edge latest prediction: Production ends in July 2024

In June, Auto Forecast Solutions put out a report compiled by its vice president of global forecasting, Sam Fiorani. One item in the report covered how Fiorani had heard from "multiple sources" that Ford shut down the program to replace the Edge crossover in 2023. Assuming this came to pass, with the Lincoln Nautilus based on the Edge, the inference is that the Nautilus would retire at or around the same time. Ford's response to media queries about the report was either "No comment" or PR-speak deflection. Lincoln's statement on the matter to Motor1, a crafty non-answer, was, "The Nautilus plays and will continue to play an important role in Lincoln’s growing SUV portfolio which includes the Corsair, Aviator and Navigator. Lincoln is investing in growth segments like SUVs and we have no plans to exit the segment." It's possible Lincoln has no plans to leave the segment, but the Nautilus might, according to a fresh, unsourced report in Ford Authority. The site claims the Nautilus will end production at the Oakville Assembly Plant in Ontario, Canada, in July 2024.  Again, we can't know how much, if any of this, is true. But we're zeroing in on a timeline for the potential end of the Edge and Nautilus in the U.S. Those are the only two products Oakville currently builds, and when the Canadian union Unifor asked Ford about the reports in June, Ford couldn't offer union reps anything concrete or reassuring. The Detroit News quoted Unifor chief Jerry Dias as saying of the automaker, "There is no question, they are going through a major evaluation of their portfolio, based on a whole host of things."   We could be seeing one of the earlier theories for Edge's potential demise coming true. Some analysts suspect Ford could be pruning its crossover lineup because it has too many similarly-sized offerings at the moment, the Edge hasn't met its sales targets in Europe, and more compact crossovers are on the way that could bring better street cred if they're associated with the Bronco or Bronco Sport. Unifor and Ford are now in negotiations over a new contract, so it's possible we'll get more clarity in the next month or so about Ford's plans and what will come of Oakville and its roughly 4,000 workers. If Ford walks away from the assembly plant, it will only have two engine plants left in Canada, and no vehicle assembly north of the border for the first time in about a century.