1972 Lincoln Continental Mark Iv 36,816 Original Mile on 2040-cars

Auto blog

Ford recalls 2020-21 Explorer and Lincoln Aviator, 2021 E-Series

Ford announced safety recalls for the 2020-2021 Explorer and Lincoln Aviator along with the 2021 E-Series early Monday. The recalls address entirely different issues.  In the case of the 2020-2021 Ford Explorer and Lincoln Aviator, that issue is motor mount hardware. Specifically, the fasteners that secure the passenger-side motor mount may back out. In Ford's words, this can result in a "loss of power," which is the entirely predictable result of an engine parting ways with the vehicle it powers.  As alarming as that may sound, owners should not have to worry about anything extreme, as the passenger side mount is only one of multiple, and Ford says it is not aware of any incidents that have occurred with vehicles in customer hands. Ford says it impacts only about 1400 examples of the Explorer and Aviator in the States (plus two in Mexico and 65 in Canada) that were built at Chicago Assembly Plant between July 28 and 30, 2020. Ford is in the process of alerting its owners to the recall, and those with affected models will have their mount hardware replaced by their local Ford dealerships free of charge.  The 2021 E-Series is being recalled for a potential heat management issue resulting from improperly aligned thermal insulation on the underside of its engine cover. In vehicles where this insulation was not properly installed so that it reaches all the way to the edges of the cover, the resulting heat bleed can cause high in-cabin surface temperatures, and direct contact them could result in burns.  This is the larger of the two recalls, as Ford says it covers nearly 33,000 examples sold in the United States and Canada. Fortunately, as with the above issue, Ford says it has not been made aware of any customer incidents. Ford says the remedy is a set of insulation patches for the exposed areas.  Related Video:

2020 Lincoln Aviator crossover is a hot rod with 400 horsepower standard

LOS ANGELES — The 2020 Lincoln Aviator has finally been revealed in production form following its "concept" debut at the New York Auto Show earlier this year. We add the quotes because the production model is identical to the New York model. Appearances aside, the big news is under the hood. At launch, the Lincoln Aviator will be available with two engines. They're both twin-turbocharged 3.0-liter V6s, and one of them is a plug-in hybrid. The standard engine makes an impressive 400 horsepower and 400 pound-feet of torque. To help put that into perspective, that's about 40 more horsepower than the top-rung six-cylinder Mercedes-Benz GLE 450 we just drove, and about 65 more horsepower than the entry-level six-cylinder BMW X5 xDrive40i. Moving to the hybrid powertrain brings Aviator output to 450 horsepower and a staggering 600 pound-feet of torque. That's just 6 ponies shy of the V8-powered BMW X5 xDrive50i, but 121 more pound-feet of torque. This plug-in hybrid powertrain will also be able to do the typical plug-in stuff. You can run the vehicle in pure electric mode or hold the charge to be deployed at a more advantageous time such as driving in town at the end of a highway drive. Lincoln did not give estimates for the pure electric range. Fuel economy hasn't been revealed yet, either. Other interesting hybrid notes: The battery fits entirely under the passenger side of the vehicle between the front and rear wheels. The motor is sandwiched between the engine and transmission. Lincoln also mentioned this is a modular hybrid system, so expect to see it appear in other Lincoln and Ford products in the future. This powertrain layout is part of what makes it possible for all versions of the Aviator to use the same 10-speed automatic transmission, which is gradually proliferating through the whole Ford family. From there, power either goes solely to the rear wheels, or through an optional all-wheel-drive system. All of this power can ride on an available adaptive air suspension the company calls Air Glide. It works like many adaptive suspensions, scanning the road with a camera to adjust damping for bumps ahead. It does have some other trick features, though. When the Aviator is parked, the suspension lowers to make the crossover look more attractive while sitting. And when the driver approaches, it lowers itself further for easier ingress. It also raises itself for snow or mild off-road driving, and it lowers down at highway speeds for better aerodynamics.

Lincoln to adopt Mini-like personalization strategy?

There's no single silver bullet that will cure all that ails the Lincoln brand, and Ford knows that just as surely as we do. Coming out with exciting new models like the well-received MKC crossover counts as several steps in the right direction, assuming of course that the production version is as appealing as the concept just shown at the 2013 Detroit Auto Show, but more is needed. According to Jim Farley, executive vice president of Lincoln, one more trick may be "mass customization."
Put another way, Lincoln is considering ways to allow buyers to customize their new vehicles right off the showroom floor, similar to how things are done at Mini, and, to a lesser extent, Scion, where Farley previously served as corporate manager. Imagine, for instance, ordering a new MKC with a large Lincoln insignia embossed into the leather seatbacks, according to Automotive News.
While we're not so sure anybody is all that interested in paying extra for more Lincoln logos, it's a strategy that has proven rather fruitful at Mini. Only time will tell if Ford's erstwhile luxury division will once again be seen as something truly worth reaching for, and if customers are willing to pay a further premium for customization.