on 2040-cars

Auto blog

Toyota settles first wrongful death suit related to unintended acceleration

Toyota's sales seem to have rebounded from the unintended acceleration issues from 2009 and 2010, but the automaker is far from done dealing with this situation. Following a settlement worth up to $1.4 billion for economic loss to affected vehicle owners, Toyota has settled rather than going to trial in a wrongful death lawsuit stemming from an accident in Utah in 2010 that left two passengers dead. This isn't the first case in which Toyota has settled, but it was the first among a consolidated group of cases being held in Santa Ana, CA.
According to The Detroit News, this case was scheduled to take place next month, and it was for a November 2010 incident in which Paul Van Alfen and Charlene James Lloyd were killed in a Camry when, based on findings by the Utah Highway Patrol, the accelerator got stuck causing the car to speed out of control and hit a wall; the terms of the settlement were not announced.
The article says that while Toyota will settle on some cases, it doesn't plan on settling on all of them as it still wants to be able to "defend [its] product at trial." This will probably be the case in suits claiming that software for the drive-by-wire accelerator was the cause of an accident in a Toyota or Lexus vehicle. The question of whether or not the electronic accelerator played any role in this problem has been a hot-button topic since the beginning. Toyota has issued recalls in the past to attempt to prevent unintended acceleration caused by trapped floor mats and faulty accelerator pedals, but it also says driver error was to blame in some instances.

Lexus recalling 3,000 NX 200t CUVs for faulty brake system part

Lexus is recalling about 3,000 examples of the 2015 NX 200t in the US because of possible damage to the ABS actuator during assembly. On vehicles with the faulty part, the anti-lock brakes, traction control and stability control might not function properly. If the ABS is activated while driving, it could cause "a loss of vehicle stability," according to the company. No crashes, injuries, or fatalities have been reported. According to company spokesperson Cindy Knight to Autoblog, affected owners will receive notification by mail of this problem in early July. Dealers will inspect the actuator on the NX200t and will replace it, if necessary. Related Video: LEXUS RECALLS CERTAIN MODEL YEAR 2015 NX VEHICLES TORRANCE, Calif., May 27, 2015 – Toyota Motor Sales, U.S.A., Inc. today announced that it is conducting a safety recall of approximately 3,000 model year 2015 Lexus NX 200t vehicles. The involved vehicles are equipped with an Anti-Lock Braking system (ABS), Traction Control System (TRAC), and Vehicle Stability Control System (VSC) which are controlled by the ABS actuator. There is a possibility that a component inside the actuator could be damaged during assembly and later not operate properly. Under some driving conditions, if the ABS is activated, this could cause a loss of vehicle stability, which can increase the risk of a crash. To date, Toyota is not aware of any crashes, injuries or fatalities caused by this condition. All known owners of the involved Lexus vehicles will be notified by first class mail. Lexus dealers will inspect the ABS actuator and if necessary replace it with a new one. Information about automotive recalls, including but not limited to the list of involved vehicles, is subject to change over time. For the most up-do-date recall information, customers should contact Toyota Customer Service at 1-800-331-4331, or Lexus Customer Service at 1-800-255-3987. Customers can also access current information on open safety recalls for their vehicles by visiting www.toyota.com/recall or http://www.safercar.gov/ and entering their Vehicle Identification Number (VIN). ###

Lexus NX rolls on wheels made of ice

To create this rolling ice sculpture, Lexus teamed up with London-based Hamilton Ice Sculptors, which fitted the compact luxury crossover with wheels and tires crafted from ice. The sub-zero craftsmen then deep-froze the entire vehicle, stored it at -22 degrees Fahrenheit, and drove it around London – pleasantly surprised to find that it started on the first try. As far as publicity stunts go, the finished product looks even cooler than the cardboard IS that Lexus had crafted a few months ago or the biometric glow-in-the-dark RC F from this past summer. The project took three months of research, design, and testing to carry out. The wheels replicate the alloys on the NX with millimetric precision, right down to the tread pattern, and each one took a team of four craftsmen 36 hours of work to complete. Of course, blocks of ice would have a hard time supporting the weight of the vehicle – especially while in motion – so the frozen wheels were reinforced with clear acrylic discs. And to make it all glow, they were also fitted with in-wheel LED lighting. This isn't the first time we've seen ice sculptors apply their skills to automobiles, following the frozen Canadian Tire pickup, Toyota Land Cruiser, Nissan Cube, and Saab Aero-X we've seen in recently years. But this one is at least as cool, in one sense or another. Scope out the results in the video above, and the process that went into their creation in the making-of video below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. LEXUS NX RIDES ON THE WORLD'S COOLEST WHEELS – CRAFTED IN SOLID ICE The concept of driving on ice has taken on a whole new meaning for Lexus, which has crafted the world's first set of working wheels and tyres made from frozen water. Brussels, Belgium - True to its mission of "creating amazing" and inspired by the craftsmanship that goes into every vehicle it makes, Lexus commissioned a team of ice sculpture specialists to explore how ice could be used in place of conventional alloy metal and rubber. After three months' research, design and testing, the finished wheels were fitted to a Lexus NX for the ultimate ice drive. The car itself was deep-frozen, stored for five days at -30°C (it started first time) before being driven off down a London road. The addition of in-wheel LED lighting added an extra dramatic dimension to the cutting-edge contemporary styling of the NX.