Florida Owned Paddles Sunroof Push Button Start on 2040-cars

Auto blog

Lexus NX rolls on wheels made of ice

To create this rolling ice sculpture, Lexus teamed up with London-based Hamilton Ice Sculptors, which fitted the compact luxury crossover with wheels and tires crafted from ice. The sub-zero craftsmen then deep-froze the entire vehicle, stored it at -22 degrees Fahrenheit, and drove it around London – pleasantly surprised to find that it started on the first try. As far as publicity stunts go, the finished product looks even cooler than the cardboard IS that Lexus had crafted a few months ago or the biometric glow-in-the-dark RC F from this past summer. The project took three months of research, design, and testing to carry out. The wheels replicate the alloys on the NX with millimetric precision, right down to the tread pattern, and each one took a team of four craftsmen 36 hours of work to complete. Of course, blocks of ice would have a hard time supporting the weight of the vehicle – especially while in motion – so the frozen wheels were reinforced with clear acrylic discs. And to make it all glow, they were also fitted with in-wheel LED lighting. This isn't the first time we've seen ice sculptors apply their skills to automobiles, following the frozen Canadian Tire pickup, Toyota Land Cruiser, Nissan Cube, and Saab Aero-X we've seen in recently years. But this one is at least as cool, in one sense or another. Scope out the results in the video above, and the process that went into their creation in the making-of video below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. LEXUS NX RIDES ON THE WORLD'S COOLEST WHEELS – CRAFTED IN SOLID ICE The concept of driving on ice has taken on a whole new meaning for Lexus, which has crafted the world's first set of working wheels and tyres made from frozen water. Brussels, Belgium - True to its mission of "creating amazing" and inspired by the craftsmanship that goes into every vehicle it makes, Lexus commissioned a team of ice sculpture specialists to explore how ice could be used in place of conventional alloy metal and rubber. After three months' research, design and testing, the finished wheels were fitted to a Lexus NX for the ultimate ice drive. The car itself was deep-frozen, stored for five days at -30°C (it started first time) before being driven off down a London road. The addition of in-wheel LED lighting added an extra dramatic dimension to the cutting-edge contemporary styling of the NX.

Lexus nixes RC convertible in favor of LS-based 3-row crossover [w/poll]

When Lexus unveiled the LF-C2 concept at the LA Auto Show last week, it did two things: it previewed the direction in which the Japanese luxury automaker's design department was looking for the immediate future, and it previewed a cabrio version of the RC coupe (to replace the IS Convertible) on the other. But the latter, according to new reports, was ruled out before the concept ever took the stage. Although the prospect of a convertible version was engineered right into the RC coupe's chassis, Motor Trend reports that plans to put such a vehicle into production were met with hostility by Lexus dealers, who were offered a two-door convertible instead of the three-row crossover they've been lobbying for. As a result – and with a finite amount of development bucks on hand – Lexus is reportedly listening to its dealers, axing the RC Convertible program and proceeding instead with a seven-seat crossover. Plans to stretch the RX were reportedly ruled out, so Toyota is reportedly proceeding instead with a new model to be based on the LS sedan. The new model would take aim at the likes of the Mercedes GL, Audi Q7 and Infiniti QX60 when it arrives in three years as a 2018 model. It's not the first time we've seen Toyota listen to dealers asking for a high-end people-mover: Earlier this year, dealers in Japan asked the automaker for a luxed-out minivan, prompting it to build the Esquire van just for the Japanese Domestic Market.

Toyota will bring Lexus-based Platform 3.0 autonomous vehicle to CES

The Toyota Research Institute says it will bring its next-generation Platform 3.0 automated driving vehicle to CES next week, an autonomous test car that is notable for incorporating the sensors and cameras into the body, rather than as ungainly attachments, and with the spinning LIDAR rooftop sensor replaced by a more sleek panel of sensors. Platform 3.0 is built on a Lexus LS600hL. Toyota Research Institute says it enlisted CALTY Design Research in Ann Arbor, Mich. and engineers at Toyota's nearby North America R&D center to conceal the equipment. As a result, Platform 3.0 gets a new rooftop weather and temperature proof panel, which it says was inspired by off-road motorcycle helmets, integrated into the available space in the sunroof compartment to minimize height. It's also embellished with chrome trim along the side, where it meets the roofline, and the rear swoops down to integrate with the LS's contour lines. The team also managed to consolidate computational electronics and wiring into a small box in the trunk. Toyota says the Platform 3.0 is one of the most perceptive autonomous test vehicles on the road today, with a design makes the test vehicle easy to build at scale. It gets a Luminar LIDAR system boasting a 200-meter, 360-degree range (the previous version only tracked the forward direction), enabled by four high-res LIDAR scanning heads that help it better see dark objects. Shorter-range LIDAR sensors feature low on all four sides of the vehicle, one on each front quarter panel and on the front and rear bumpers, to detect low-level and smaller objects, like children or road debris. Production begins this spring at the Toyota Motor North America R&D headquarters at low volumes to allow for flexibility, given the rapid rate of development of Toyota's autonomous test platforms. Some will be assembled using Toyota's Guardian dual-cockpit control layout to allow for transferring control between a human test driver and the automated system while keeping the driver as a backup, while the single-cockpit, fully autonomous Chauffeur mode will be shown at CES starting Jan. 9.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Least favorite vehicles of 2017