2008 Lexus Gx 470 on 2040-cars

Auto blog

Toyota develops new pre-collision system with steering assist

A number of automakers are working on developing fully autonomous cars, but it looks like the groundwork for such technologies will likely show up first as semi-autonomous systems for both safety and convenience. Following recent announcements from Nissan and Ford in this area, Toyota has now released information for some of its advanced semi-autonomous technologies that could be offered in production cars over the next few years.
On the safety front, Toyota's new pre-collision system with pedestrian-avoidance steering assist is aimed at protecting the folks who aren't in the car. This system combines visual and audible alerts with automatic brake assist and automatic steering. If warnings don't get the driver to slow down, the brake assist kicks in if a collision is very likely, but if that is still not able to avoid the impending collision (and if there is enough room to do so), the car can automatically steer itself around the pedestrian. This sounds most beneficial for last-second dangers such as a person accidently stepping out into the road in front of a car. Toyota hopes to have this technology available to customers by 2015.
The Japanese automaker is also testing a suite of technologies called Automated Highway Driving Assist (AHDA). The key part of this is a new adaptive cruise control system that uses vehicle-to-vehicle (V2V) communications rather than a radar-based system. This cooperative-adaptive cruise control allows vehicles to communicate their acceleration and deceleration data with other cars, which Toyota says this helps to improve fuel efficiency and traffic flow. Also a part of AHDA is the Lane Trace Control feature, which sounds like a next-gen lane keep assist. This system uses cameras, radar and a computer to keep the vehicle in a "smooth driving line" by being able to change steering angle, engine torque and braking force. Toyota says this technology could be in place by the "mid-2010s."

Toyota Camry, Lexus RX to get aluminum parts

Ah, aluminum. The lightweight, strong material has long held a following within the premium ranks, but as Ford prepares to launch an aluminum F-150, the material is gaining acceptance among more mainstream automakers. Toyota is one such brand, with a new report indicating that the Japanese giant will add aluminum bits and bobs to some of its upcoming vehicles.
These won't be full, aluminum-intensive treatments like the F-150, however. Automotive News reports that an aluminum hood and liftgate will be coming to the 2016 Lexus RX, and following that, the Camry will get a bonnet built from Element 13 for model year 2018.
As AN points out, Toyota is no stranger to aluminum, using it in Japanese-built models like the Prius and Scion FR-S. The RX and Camry, though, will mark the first time the company's North American factories will use the material, and they'll do so on a significantly larger scale, owing to the higher volumes that the Camry and RX represent.

Toyota recalls 370k Sienna minivans, 10.5k Lexus GS models over separate issues

The year of the recall continues, but this time it isn't from General Motors. Toyota is announcing two, separate recalls affecting a pair of its models.
First, Toyota is recalling 370,000 Sienna minivans from the 2004 to 2011 model years that are registered or originally sold in cold-weather states. The problem is that the spare tire carrier assembly cable can be splashed by water contaminated with road salt and cause corrosion. There is a splashguard in place to prevent this, but it sometimes gets lost in "normal usage," according to the company. If the cable does break, then "the spare tire may separate from the vehicle."
This is actually the second repair for this problem for some of these vehicles. In 2010, Toyota issued a recall on 600,000 Siennas from the 1998 to 2010 model years. At the time, it installed a new splashguard and sprayed the area with an anti-rust chemical. However, according to Toyota spokesperson John Hanson speaking to Autoblog, the campaign worked for the 1998 to 2003 models but wasn't sufficient for the newer ones. For the latest recall, the vehicles are getting the entire cable replaced with a stainless steel unit and a new splashguard.