2013 Range Rover Hse Package Front & Rear Climate Vision Assist Prem. Audio on 2040-cars

Auto blog

NHTSA is investigating FCA shifters for roll-away accidents again, this time the rotary units

It seems FCA's shifter troubles aren't over yet. Now, just a few months after issuing a recall to resolve user-related issues with its monostable shifters, the company is again under investigation by NHTSA. The issue is related to the potential for cars to roll away when the rotary-style shifter is not properly placed in park. Two FCA models are the subject of this investigation: the 2013–2016 Ram 1500 and the 2014–2016 Dodge Durango. NHTSA estimates about 1,000,000 vehicles would be affected if a recall is issued. The investigation was started following 43 complaints of vehicles rolling away while supposedly being in "park." Among the complaints were reports of 25 crashes and 9 injuries. NHTSA does point out that in every incident, the parking brake was not engaged. A representative from FCA also gave us an official statement regarding the investigation: "FCA US is cooperating fully with NHTSA's investigation, the scope of which is limited. Other vehicles equipped with rotary shifters are not included. In accordance with prudent practice, the Company joins NHTSA in urging all drivers to use their vehicles' parking brakes." View 35 Photos As mentioned above, other Chrysler products with rotary shifters, such as the Pacifica minivan and 200 sedan, are not involved in this investigation. One of the key differences, as the representative told us, is that these vehicles have electronic parking brakes that automatically engage if the driver does not select park and then opens the door with the seatbelt unbuckled. The Ram 1500 and Durango feature mechanical, manually operated parking brakes and therefore cannot activate the brake automatically. Because this is currently an investigation, an exact cause for the incidents has yet to be determined, and none of the vehicles have been recalled. It's possible there could be a mechanical defect. However, the issue could be a confusing interface causing user error, as was the case with FCA's monostable shifters, where drivers think they've put the car in park but actually haven't. Something that indicates it could be a case of confused users is that NHTSA also opened an investigation into 2012–2014 Jaguar XF and Land Rover Range Rover Evoques for similar issues. Both vehicles use a rotary shifter and have had roll-away complaints levied as well. Even if it is a case of user error, FCA and Jaguar Land Rover may still have to recall their vehicles.

Jaguar Land Rover reportedly developing Road Rover car

Reports are circulating in the automotive media that Jaguar Land Rover is developing a vehicle that's not an SUV. Called the Road Rover, it would be an all-electric luxury car with "some" all-terrain capability, hinting at all wheel drive. Initially, the EV would launch in late 2019, then spawn more models to complete the lineup. There is also talk about JLR's interest in an outright purchase of an existing luxury car brand to join its portfolio, and that parent company Tata has already given this strategic move the green light. Tata has also reportedly made moves to protect its JLR ownership via acquiring more of its own stock. All this excitement brings to mind the fact that there once existed an actual Road Rover — the Rover brand. Having evolved into MG Rover before going into administration in 2005 and subsequently reborn in China under SAIC Motor ownership, Rover was a moderately posh British carmaker just beneath the level of prestige that Jaguar offered. For some years, both were part of the same corporation. The last Rover saloons were designed and built with BMW input, and at that point Land Rover had already become part of Ford, almost a decade after Jaguar did. Ford's tenure with Land Rover lasted from 2000 to 2008, when Tata bought the British brand — along with the Rover name. Would it just make sense to badge the road car Rover, with no Road or Land affixed to it? Rover's slovenly demise is more than a decade old now, but there's plenty of valuable history still embedded in the long-shelved Viking ship logo. Cast aside memories of Sterling-badged Honda Legend platform siblings and unattractively Federalized SD1 series cars, and take whatever good the 1999-2005 Rover 75 brought to the table — maybe it's time for Rover to be reborn in the current Jaguar Land Rover family. According to Autocar, the first Road Rover would be developed in tandem with the next-generation Jaguar XJ, so they would share an aluminum architecture suitable for both internal combustion engines and battery electric technology, depending of the model. If anything, there is delicious irony to this: The 1980s XJ generation that Jaguar spent decades developing was claimed to be engineered in such a way that the occasional stablemate Rover's Buick-derived 3,5-liter V8 wouldn't have fit in its engine bay — to preserve the Jaguar bloodline. To have the new XJ and a Rover cross paths again would only be fitting. Related Video: This content is hosted by a third party.

Who picks car colors and materials? Designers like Hannah Custance

As automotive journalists, we're often asked "how did you get that job?" People usually didn't even know you could do such a thing. In this 7 Questions series, we're highlighting other jobs in the automotive industry that you might not have heard about before. What do they do, how'd they get to do it and other questions about their particular corner of the car world. Slowly but surely, the automotive landscape is becoming more colorful. Look beyond the unrelentingly conservative palette of white, black and gray most buyers opt for and you'll see the increased use of exterior trim types beyond the usual chrome. There's gloss black, of course, but also other metallic finishes like gold or copper. Those can be found inside, too, where there's also an increase in colorful leathers and trims, innovative fabrics, new wood types and finishes, and greater creativity in general. So where is this change coming from? The answer is designers like Hannah Custance, the color and materials design manager for Jaguar Land Rover. Her team's latest effort is also its magnum opus, the 2022 Range Rover. Although saddled with the expectations that comes with one of the automotive industry's classic nameplates, the all-new Range Rover is also a celebration of cutting edge manufacturing and fashion-forward materials selection. We sat down with Hannah at the L.A. Auto Show to find out more about color and materials designers, how she ended up in the industry, and advice she might have for young designers out there. It has been condensed for brevity. Autoblog: What does a color and materials design manager to do?Hannah Custance: I basically look after a team of designers who design finishes for every A surface on the car. So, that could be exterior finishes. It could be interior trim materials, soft materials, hard materials, chromes, metals, woods, ceramic – that's one of the new ones – anything you can kind of touch and see is color material design. Autoblog: How early in the design process does your team become involved.Hannah: Right at the very start. In fact, we look at materials that don't have a product assigned to them or a car assigned to them. So, it takes actually a very long time for us to get materials approved and fully validated. We have to find suppliers that are willing to work in automotive and our test standards are incredibly high, some of the highest in the industry.